APAR status
Closed as fixed if next.
Error description
Problem to translate a detail : with switched off duplicate mode, only the points and text are moved. The lines keep unchanged. By-pass: Save As the drawing after Translate operation, then after re-opening, it will be OK (the lines are correctly translated like points and text). .
Local fix
Problem summary
Problem to traslate a detail Problem to translate a detail : with switched off duplicate mode, only the points and text are moved. The lines keep unchanged. By-pass: Save As the drawing after Translate operation, then after re-opening, it will be OK (the lines are correctly translated like points and text). .
Problem conclusion
Temporary fix
Comments
THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 14 GA level. Incident Diagnosis The points and texts only are translated during translation of a detail. The lines keep unchanged Development Request Justification Remove the optimisation of visualization in the case of Detail sheet Answer and By-Pass This problem will be corrected on V5R14ga Apar closed FIN (Fix In Next Release) on V5R13 By-pass: 1- Save As the drawing after Translate operation 2- Re-open it, it will be OK (the lines are correctly translated like points and text). .
APAR Information
APAR number
HD20818
Reported component name
CATIA V5/NT/200
Reported component ID
569151000
Reported release
512
Status
CLOSED FIN
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2004-04-14
Closed date
2004-05-26
Last modified date
2004-05-26
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Applicable component levels
R513 PSN
UP
[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"512","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
26 May 2004