HD18348: GENERATIVE DRAFTING - SYMBOLIC FILLET ARE NOT FULLY CREATED IN AN ISOMETRIC VIEW

APAR status

• Closed as program error.

Error description

• Generative Drafting - Symbolic fillet are not fully
  created in an isometric view
  SCENARIO:
  Create an isometric view with symbolic fillet
  RESULT:
  A part of the Symbolic fillet representation is
  missing
  .
  

Local fix

Problem summary

• Generative Drafting - Symbolic fillet are not fully created in
  an isometric view
  Generative Drafting - Symbolic fillet are not fully
  created in an isometric view
  SCENARIO:
  Create an isometric view with symbolic fillet
  RESULT:
  A part of the Symbolic fillet representation is
  missing
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 14 GA level.
  Incident Diagnosis
  Symbolic fillets wrongly displayed in drafting
  isometric view
  Correction Explanation
  Symbolic fillets wires are :
  1. shifted in 3D the outside direction of the matter
  in order not to be removed by the HLR : the
  shifting direction was wrong in this case, and too
  important, as seen in the isometric view
  2. once projected, they are relimited in order not to
  touch the projected faces around : the relimitation
  was too important in this case
  Answer and By-Pass
  update the drawing with the fix, the views will look
  better
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R514 PSN

     UP