HD17007: ASSYDSGN : UNABLE TO CREATE AN ASSEMBLY HOLE BASED ON A PART HO LE.

APAR status

• Closed as documentation error.

Error description

• Abstract: ASSYDSGN : UNABLE TO CREATE AN
  ASSEMBLY HOLE BASED ON A PART HOLE.
  Description:
  1)Open up mPOSHOUSING ASSEMBLY
  REV1.Catproduct.
  2)Select INSERT/ASSEMBLY FEATURES/HOLE.
  3)Select Hole.2 from the part file FRONT BEZEL
  REV1.
  Result:You are not able to select the hole feature in
  R12SP04, in R10SP04 you were able to select the
  hole feature however you would receive an error
  message.
  .
  

Local fix

Problem summary

• ASSYDSGN : UNABLE TO CREATE AN ASSEMBLY HOLE BASED ON A PART HO
  LE.
  Abstract: ASSYDSGN : UNABLE TO CREATE AN
  ASSEMBLY HOLE BASED ON A PART HOLE.
  Description:
  1)Open up mPOSHOUSING ASSEMBLY
  REV1.Catproduct.
  2)Select INSERT/ASSEMBLY FEATURES/HOLE.
  3)Select Hole.2 from the part file FRONT BEZEL
  REV1.
  Result:You are not able to select the hole feature in
  R12SP04, in R10SP04 you were able to select the
  hole feature however you would receive an error
  message.
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 13.
  .
  The following modification has been included :
  .
  Documentation Reference
  Assembly Design
  Advanced Tasks
  Assembly Hole
  MODIFICATION:
  Before reusing Part Design hole, take note that:
  You cannot reuse hole for which the reference
  geometry for creation is not a planar surface.
  .
  Please go through the link given for more details.
  .
  Regards,
  Arun VARDHAN.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels