HD16426: WE CANT GENERATE AN ISOMETRIC VIEW WITH A CATPRODUCT

APAR status

• Closed as program error.

Error description

• We cant generate an Isometric View with a
  Catproduct.
  .
  STEP BY STEP SCENARIO:
  1. Open provided CATProduct
  2. create a new Drawing: File/ new/ Drawing/ iso A4
  3. create in the Drawing a isometric View
  4. select a part from the catproduct
  5. select the drawing and confirm
  -> CATIA goes into CPU loop
  .
  

Local fix

Problem summary

• We cant generate an Isometric View with a Catproduct
  We cant generate an Isometric View with a
  Catproduct.
  .
  STEP BY STEP SCENARIO:
  1. Open provided CATProduct
  2. create a new Drawing: File/ new/ Drawing/ iso A4
  3. create in the Drawing a isometric View
  4. select a part from the catproduct
  5. select the drawing and confirm
  -> CATIA goes into CPU loop
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5
  RELEASE 14 GA level.
  Incident Diagnosis
  We cant generate an Isometric View with a
  Catproduct
  Correction Explanation
  It is not a regression. New detection of helix
  type surface was leading to a specific treatment.
  The CPU loop in this treatment is now removed.
  Answer and By-Pass
  This problem has been corrected on V5R14ga.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R514 PSN

     UP