HD15324: PRODEDIT: THE FILTER 'ECO SPECIFY' ALSO RETURNS A LOT OF IRRELE VANT INSTANCES

APAR status

• Closed as program error.

Error description

• THE FILTER 'ECO SPECIFY' ALSO RETURNS A LOT
  OF IRRELEVANT INSTANCES
  Scenario:
  A complex and versioned product structure that
  has been created under ECO control.
  1. Open the Define Navigational Filter panel and
  then the Configuration
  Filter panel.
  2. Select 'Select Changes by ECO' and 'Specify'.
  Search for a relevant
  ECO that has been used to update any part version
  in the structure.
  Select and click OK three times to make the filter
  active.
  => the correct version of the affected part is
  shown, but many (but
  not all) parallel assemblies are also shown. NOK.
  3. Re-open the Configuration Filter to check how
  the filter is really
  defined.
  => No ECO at all is defined.
  
  .
  

Local fix

Problem summary

• PRODEDIT: THE FILTER 'ECO SPECIFY' ALSO RETURNS A LOT OF IRRELE
  VANT INSTANCES
  THE FILTER 'ECO SPECIFY' ALSO RETURNS A LOT
  OF IRRELEVANT INSTANCES
  Scenario:
  A complex and versioned product structure that
  has been created under ECO control.
  1. Open the Define Navigational Filter panel and
  then the Configuration
  Filter panel.
  2. Select 'Select Changes by ECO' and 'Specify'.
  Search for a relevant
  ECO that has been used to update any part version
  in the structure.
  Select and click OK three times to make the filter
  active.
  => the correct version of the affected part is
  shown, but many (but
  not all) parallel assemblies are also shown. NOK.
  3. Re-open the Configuration Filter to check how
  the filter is really
  defined.
  => No ECO at all is defined.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON ENOVIA
  VERSION 5 RELEASE 14 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R13SP02 AND V5R12SP06.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA LCA NT/2

• Fixed component ID

  569151700

Applicable component levels

• R512 PSN SP51206

     UP04/03/31 I 1000

• R513 PSN SP51302

     UP04/03/22 N 1000