HD14327: KINEMATICS JOINT COULD NOT BE CREATED ON PART IN SUB PRODUCT

APAR status

• Closed as fixed if next.

Error description

• kinematics joint could not be created on part in sub
  product
  
  1) open CATProduct
  2) go in DMU Kinematics workshop
  3) select cylindrical joint and try to do it between
  the axis of XXXY under the sub product
  XXX and the axis of YYYZ under the sub product
  YYY
  You can t do it.
  4) Now, for each sub product above, make it
  flexible ( by right click and oblect/flexible)
  5) try to do it again and you always can't!!!!
  
  So you can t create mecanism of part which are in
  sub assembly even if they are flexible.
  So could you correct this problem of the flexible
  sub assembly possibilities to succeed in creating
  such mecanism.
  
  REM: You could create a mecanism directly in the
  sub assembly and import it in the global assembly,
  but my customer can t use this function to make
  the exact mecanism he want. He should create all
  its mecanism in the global assembly, without
  importing mecanism.
  
  
  
  .
  

Local fix

Problem summary

• kinematics joint could not be created on part in sub product
  kinematics joint could not be created on part in sub
  product
  
  1) open CATProduct
  2) go in DMU Kinematics workshop
  3) select cylindrical joint and try to do it between
  the axis of XXXY under the sub product
  XXX and the axis of YYYZ under the sub product
  YYY
  You can t do it.
  4) Now, for each sub product above, make it
  flexible ( by right click and oblect/flexible)
  5) try to do it again and you always can't!!!!
  
  So you can t create mecanism of part which are in
  sub assembly even if they are flexible.
  So could you correct this problem of the flexible
  sub assembly possibilities to succeed in creating
  such mecanism.
  
  REM: You could create a mecanism directly in the
  sub assembly and import it in the global assembly,
  but my customer can t use this function to make
  the exact mecanism he want. He should create all
  its mecanism in the global assembly, without
  importing mecanism.
  
  
  
  .
  

Problem conclusion

Temporary fix

Comments

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 15 level.
  
  
  Incident Diagnosis
  kinematics joint could not be created on part in sub
  product
  
  
  Development Request Justification
  This behavior is not supported but will be possible
  in the future (planned for R15).
  
  Answer and By-Pass
  no by pass at this time.
  
  
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R513 PSN

     UP