HD13735: STEP / AFTER CATIA V5 - STEP - CATIA V5 LOOP , ADVANCED FACES A ND A MANIFOLD SOLID BREP ARE KO / GEOMETRY TRANSFER FAILURE

APAR status

• Closed as program error.

Error description

• Problem : After loop back CATIA - STEP203 -
  CATIA test, some face are lost.
  .
  Scenario: (model dependent)
  ------------
  1. File/Open the sent CATPart
  2. Save as .stp format (STEP AP203)
  3. File/Open above step file
  === Some faces are not transfered
  
  .
  

Local fix

Problem summary

• STEP / AFTER CATIA V5 - STEP - CATIA V5 LOOP , ADVANCED FACES A
  ND A MANIFOLD SOLID BREP ARE KO / GEOMETRY TRANSFER FAILURE
  Problem : After loop back CATIA - STEP203 -
  CATIA test, some face are lost.
  .
  Scenario: (model dependent)
  ------------
  1. File/Open the sent CATPart
  2. Save as .stp format (STEP AP203)
  3. File/Open above step file
  === Some faces are not transfered
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 14 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON
  V5R13 GA AND ON V5R12SP04
  .
  Please note that no fix on V5R11 level can be
  provided for this problem.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R511 PSN

     UP

• R512 PSN SP51204

     UP03/12/18 I 1000

• R513 PSN

     UP