HD11338: PARTDESIGN / REMOVE BOOLEAN OPERATION FAILS WITH FACES CONFRONT ATION PROBLEM WHEN UPDATED ON UPPER CATIA LEVEL

APAR status

• Closed as program error.

Error description

• Boolean operation becomes impossible when
  updating in a higher level from R10 SP3.
  .
  Scenario: (model dependent)
  -----------
  1. Open the sent CATPart
  2. Force update-required status
   (e.g. double click to edit Pad.1, click to
  choose "mirrored extent"  and then again to
  deselect,  press OK to cause the whole part to
  require update)
  3. Update if it not automatic.
  ==  update error appears on remove feature :
  " confrontation between highlighted faces can not
  be solved"
  .
  - This remove was created succesfully on
  V5R10SP3.
  
  .
  

Local fix

Problem summary

• PARTDESIGN / REMOVE BOOLEAN OPERATION FAILS WITH FACES CONFRONT
  ATION PROBLEM WHEN UPDATED ON UPPER CATIA LEVEL
  Boolean operation becomes impossible when
  updating in a higher level from R10 SP3.
  .
  Scenario: (model dependent)
  -----------
  1. Open the sent CATPart
  2. Force update-required status
   (e.g. double click to edit Pad.1, click to
  choose "mirrored extent"  and then again to
  deselect,  press OK to cause the whole part to
  require update)
  3. Update if it not automatic.
  ==  update error appears on remove feature :
  " confrontation between highlighted faces can not
  be solved"
  .
  - This remove was created succesfully on
  V5R10SP3.
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 13 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R12SP02 .
  .
  Comment: it is also fixed on V5R11 SP06.
  .
  Incident Diagnosis
  PARTDESIGN / REMOVE BOOLEAN OPERATION FAILS WITH FACES CONFRONT
  ATION PROBLEM WHEN UPDATED ON UPPER CATIA LEVEL
  .
  Correction Explanation
  Stabilization in boolean operation has been performed in case o
  f imoportant tangencies.
  .
  Answer :
  Problem has been fixed : remove feature no longer fails at upda
  te.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R511 PSN

     UP

• R512 PSN SP51202

     UP03/10/16 N 1000