HD10296: WEBXXX ANCHOR POINTS NOT WORKING

APAR status

• Closed as unreproducible in next release.

Error description

• In SFD, if a tee bar (wt124) is inserted using any of
  the Webxxx anchor
  points, and the tee is later changed to a smaller tee
  (wt100), the new
  tee bar is not anchored to the original line. (see
  space.bmp in
  uploaded zip file). The anchor point can be changed
  to any other point
  except the Webxxx points.
  
  The WebSideRight, WebSideLeft, and WebCenter
  anchor points work only
  upon initial insertion. If a tee is inserted on any
  other anchor
  point, it cannot be moved to any of the Webxxx
  points. Once an inserted
  tee has been changed from a Webxxx point to any
  other anchor point, it
  cannot be put back on any of the Webxxx anchor
  points.
  
  Stiffeners are inserted by selecting the
  StiffenerSystem_385, selecting
  the stiffener icon, selecting the sketcher icon, and
  inserting a line
  for the stiffener.
  Edit the stiffener by right clicking on it in the tree
  and changing the
  section to WT100. Click apply and the stiffener will
  jump up off the
  line.
  .
  

Local fix

Problem summary

• Webxxx anchor points not working
  In SFD, if a tee bar (wt124) is inserted using any of
  the Webxxx anchor
  points, and the tee is later changed to a smaller tee
  (wt100), the new
  tee bar is not anchored to the original line. (see
  space.bmp in
  uploaded zip file). The anchor point can be changed
  to any other point
  except the Webxxx points.
  
  The WebSideRight, WebSideLeft, and WebCenter
  anchor points work only
  upon initial insertion. If a tee is inserted on any
  other anchor
  point, it cannot be moved to any of the Webxxx
  points. Once an inserted
  tee has been changed from a Webxxx point to any
  other anchor point, it
  cannot be put back on any of the Webxxx anchor
  points.
  
  
  
  Stiffeners are inserted by selecting the
  StiffenerSystem_385, selecting
  the stiffener icon, selecting the sketcher icon, and
  inserting a line
  for the stiffener.
  Edit the stiffener by right clicking on it in the tree
  and changing the
  section to WT100. Click apply and the stiffener will
  jump up off the
  line.
  
  
  
  
  .
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 13 GA level AND
  ON V5R12SP01 AND V5R11SP05
  Incident Diagnosis
  Webxxx anchor points not working
  Reason
  already fixed.
  

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 13 GA level AND ON V5R12SP01 AND V5R11S
  P05
  
  Incident Diagnosis
  Webxxx anchor points not working
  
  
  Reason
  already fixed.
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51105

     UP03/09/16 I 1000