HD07896: PROFILE CONTOURING : CAN NOT CREATE THE "TOOL PATH"

APAR status

• Closed as program error.

Error description

• PROFILE CONTOURING : CAN NOT CREATE THE "TOOL PATH"
  
  SCENARIO :
  
  1.Open File CATProcess
    Change Workbench to "Advanced Machining".
  2.Click "Profile Contouring" icon, and select "Profile
  Contouring.1"in tree.
  3.Select "Between Curve and Surfaces" from the pull down
  menu of this panel's "Mode".
  4.Click an upper red mark (square mark), and select
    "PartBody / ThickSurface.1 / Edge" in geometry area.
  5.Click the red arrow in geometry area.
    => Direction of an arrow changes.
      (Please turn direction of an arrow inside.)
  6.Click "OK" in "Edge Selection" panel.
  7.Click an lower red mark (square mark), and select
    "PartBody / ThickSurface.2 / Face" in geometry area.
  8.Click "OK" in "Face Selection" panel.
  9.Open "machining strategy" tab page.
  10.Select "Stepover" tab page.
  11.Select "Maximum depth of cut" from the pull down menu of
    this panel's "Axial Strategy(Da) / Mode:".
  12.Cange value of "Maximum depth of cut:" to "0.5mm".
  13.Click "Replay" button.
     => "Manufacturing Warning" panel is displayed.
     < Contens of this panel >
     Replaying Tool Path. No tool position to display. << OK
  

Local fix

Problem summary

• CAN NOT CREATE THE "TOOL PATH"
  PROFILE CONTOURING : CAN NOT CREATE THE  TOOL PATH
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 12 GA lev
  el.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R11SP04.
  
  Incident Diagnosis
  PROFILE CONTOURING : CAN NOT CREATE THE
  TOOL PATH
  
  Correction Explanation
  incorrect interface update at operation edition
  
  Answer and By-Pass
  NO
  
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51104

     UP03/08/04 N 1000