HD07467: INTEROP V5-V4 : THE HLR VISU IN CATIA V4 IS NOT THE STANDARD ON E WHEN WE SAVE A CATPART IN MODEL FORMAT

APAR status

• Closed as program error.

Error description

• Scenario :
  1) Create a Part with a simple PAD
  2) Save it in .model format
  3) open the .model file with G24 level
  4) active the HLR mode
  .
  Result : as you can see, you can't use this
  visalisation mode, remove lines are displayed
  .
  By Pass : go in GRAPHIC/MOD VISU/CHOOSE/HLR
  function to modify display option
  
  .
  

Local fix

Problem summary

• INTEROP V5-V4 : the HLR visu in CATIA V4 is not the standard on
  e when we save a CATPart in model format
  Scenario :
  1) Create a Part with a simple PAD
  2) Save it in .model format
  3) open the .model file with G24 level
  4) active the HLR mode
  .
  Result : as you can see, you can't use this
  visalisation mode, remove lines are displayed
  .
  By Pass : go in GRAPHIC/MOD VISU/CHOOSE/HLR
  function to modify display option
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 12 GA lev
  el.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R11SP04
  AND ON V5R10SP08.
  .
  HLR visu in CATIA V4 is not the standard one
  when we save a CATPart in model format.
  .
  CORRECTION EXPLINATION :
  A variable not initialized with correct value
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA VERSION 5

• Fixed component ID

  569101000

Applicable component levels

• R511 PSN SP51104

     UP03/08/04 N 1000