HD07399: GSD: WHEN POWERCOPY IS PERFORMED, TREE STRUCTURE AND SHAPE IS S TRANGE

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1) Open the file .CATPart.
  => Please confirm about the position of work
  object in the tree. ( Work object is activated
  to 'Line.1'.)
  2) Sel 'Insert/Instantiate From Document' in the
  context menu.
  => 'File Selection' window is displayed.
  3) Sel .CATPart in the 'File Selection' window.
  4) Click 'Open'.
  => 'Insert Object'dialog box is displayed.
  5) Click 'Use identical name' icon.
  6) Click 'OK'.
  => Please confirm the structure of tree and shape
  of the geometry area after PowerCopy is
  performed.
  => The position in the tree
  of 'EdgeFillet1', 'EdgeFillet2', 'EdgeFillet3' is wrong
  as shapebody environment.
  And the shape of the geometry area is strange.
  >>> This is problem
  .
  <Problem>
  'EdgeFillet.1' should not be created under 'Line.1'.
  'EdgeFillet.2' should not be created under 'Open
  body.1'.
  'EdgeFillet.3' should not be created under 'Open
  body.1'.
  .
  xpected Result>                                               'E
  dgeFillet1','EdgeFillet2' and 'EdgeFillet3' should be         cr
  eated under 'Join.1' in Shape Body.
                                                                Th
  is problem occurs by the following case.                      1)
   This problem occurs when open body exists in                 th
  e tree.                                                       2)
   The position of 'EdgeFillet.1' in the tree is wrong          wh
  en work object is activated to 'Line.1'.
  
  1) This problem does not occur when open body
  does not exist
  in the tree and work object is activated
  to 'Shapebody.2'.
  .
  / Please refer '.ppt' we send/
  
  .
  

Local fix

Problem summary

• GSD: When Powercopy is performed, tree structure and shape is s
  trange
  Scenario:
  1) Open the file .CATPart.
  => Please confirm about the position of work
  object in the tree. ( Work object is activated
  to 'Line.1'.)
  2) Sel 'Insert/Instantiate From Document' in the
  context menu.
  => 'File Selection' window is displayed.
  3) Sel .CATPart in the 'File Selection' window.
  4) Click 'Open'.
  => 'Insert Object'dialog box is displayed.
  5) Click 'Use identical name' icon.
  6) Click 'OK'.
  => Please confirm the structure of tree and shape
  of the geometry area after PowerCopy is
  performed.
  => The position in the tree
  of 'EdgeFillet1', 'EdgeFillet2', 'EdgeFillet3' is wrong
  as shapebody environment.
  And the shape of the geometry area is strange.
  >>> This is problem
  .
  <Problem>
  'EdgeFillet.1' should not be created under 'Line.1'.
  'EdgeFillet.2' should not be created under 'Open
  body.1'.
  'EdgeFillet.3' should not be created under 'Open
  body.1'.
  .
  <Expected Result>
  'EdgeFillet1','EdgeFillet2' and 'EdgeFillet3' should be
  created under 'Join.1' in Shape Body.
  
  This problem occurs by the following case.
  1) This problem occurs when open body exists in
  the tree.
  2) The position of 'EdgeFillet.1' in the tree is wrong
  when work object is activated to 'Line.1'.
  
  This problem does not occur by the following case.
  1) This problem does not occur when open body
  does not exist
  in the tree and work object is activated
  to 'Shapebody.2'.
  .
  
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 10.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 12 GA level AND ON V5R11SP03.
  
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP