HD06348: THE DEGREE OF FREEDOM COMMAND DOESEN'T WORK CORRECTLY IN CATIA.

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT: The Degree of Freedom command
  doesen't work correctly in Catia.
  DETAILED DESCRIPTION:
   When you are building assemblys in many levels
  (Sub-assemblys) you  need to analyze the Parts
  that are included in the different products   with the
  degree of freedom command to make sure that all
  Parts have the  right position and can't move
  around.
   This work fine in a one level assembly but as soon
  as you get more levels  in your assembly the
  Degree of freedom command states that the Part
  have  six degrees of freedom even if it is fully
  constrained.
   This function must work, otherwise it is almost
  impossible to create large assemblys without any
  degrees offreedom.  This functionality is very
  important when we create your assemblys
  because they often consist of many parts in many
  levels.
  
  .
  

Local fix

Problem summary

• AWNSER :
     THIS PROBLEM IS NOW CORRECTED
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION 5 RELEASE 10
  .
  THIS PROBLEM IS NO MORE REPRODUCIBLE ON :
      CATIA VERSION 5 RELEASE 12 GA level
      CATIA V5R11SP02
      CATIA V5R10SP06
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51102

     UP03/06/06 N 1000