HD06042: CATIA HAPPENS TO ABEND ON DUAL PROCESSOR SERVER, DURING ANALYSIS MODEL

APAR status

• Closed as program error.

Error description

• CATIA HAPPENS TO ABEND ON DUAL PROCESSOR SERVER,  DURING
  ANALYSIS MODEL
  
  1. Start Sketcher. Select YZ plane. Create a circle with
     50mm diameter.
  2. Exit Sketcher. Create cylinder with PAD. Length 100mm.
  3. Apply aluminum as material to the cylinder.
  4. Change workbench to GPS
  5. Select statistic analysis
  6. Fix 'end face -- created at step1' with clump
     by distributed force icon, make stress 1,000N to z
  direction
     to opposite site of 'end face'
  7. Press compute icon. --> OK -->
     On 'Computation Resources Estimation'
          0.7 s of  CPU
          1.13e+003 kilo-bytes of memory
          3.22e+003 kilo-bytes of disk
       click YES
  8. 'applies customized view parameters'
      select 'stress Von Mises'
      display conter
  9.  Click 'Animate' icon
      On displaying animation, repeats followings.
        1) Rotate
        2) scaling (zoom-in, zoom-out)
        3) move
    stop
  10. Change icon from 'stress Von Mises' to 'Principal
  Stress'
  11. Click 'Animate' icon
      On displaying animation, repeats followings.
        1) Rotate2
        2) scaling (zoom-in, zoom-out)
        3) move
  12. Make zoom-in icon
  13. Then POP-UP window is displayed with i-mark
  (Information) and message 'command was interrupted' is
  issued.
  14. Press OK.  Then CATIA windows gone.
  

Local fix

Problem summary

• INCIDENT DIAGNOSIS:
     ====>.Abend after Close on symbol images animation.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
     CATIA VERSION 5 RELEASE 12 GA level
    and on V5R11SP03 and V5R10SP06
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
     ====>.Bad referencing between graphic primitives.
  
  
   ANSWER AND POSSIBLE BY-PASS:
     ====>.No
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

• FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51103

     UP03/07/03 N 1000