HD05577: PARTDESIGN / " TOPOLOGICAL OPERATORS : INVALID PROFILE BODY " O CCURS WHEN CREATING STIFFERNER AFTER SHELL

APAR status

• Closed as program error.

Error description

• SCENARIO :
  ------------
  1- open the Part
  2- as you can see, the white line is not coincidente to the top
   of the box
  3- load the Part Design workbench
  4- select the stiffener icon
  5- select the white line
   ==> Topological operators:Invalid profile body
  .
  By-pass : if you relimit the line inside the box, there is no m
  ore
  problem.
  
  .
  

Local fix

Problem summary

• PARTDESIGN / " TOPOLOGICAL OPERATORS : INVALID PROFILE BODY " O
  CCURS WHEN CREATING STIFFERNER AFTER SHELL
  SCENARIO :
  ------------
  1- open the Part
  2- as you can see, the white line is not coincidente to the top
   of the box
  3- load the Part Design workbench
  4- select the stiffener icon
  5- select the white line
   ==> Topological operators:Invalid profile body
  .
  By-pass : if you relimit the line inside the box, there is no m
  ore
  problem.
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 12 GA level
   NOTE THIS PROBLEM WILL ALSO BE FIXED ON V5R11SP02
  NOTE THIS PROBLEM WILL ALSO BE FIXED ON V5R10SP07
  .
  Comment: this problem is fixed from V5R10 SP06.
  .
   INCIDENT DIAGNOSIS:
  PARTDESIGN / TOPOLOGICAL OPERATORS : INVALID PROFILE BODY OCCUR
  S WHEN CREATING STIFFERNER AFTER SHELL
   .
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  Stiffener creation was not possible in case profile was bigger
  than the part. This case was not supported in the new algorithm
  .
  .
   ANSWER AND POSSIBLE BY PASS:
  Problem has been fixed.
  Possible by pass is to modify the profile in order to have a sh
  orter profile.
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA VERSION 5

• Fixed component ID

  569101000

Applicable component levels

• R510 PSN

     UP

• R511 PSN SP51102

     UP03/06/06 N 1000