HD01241: INT V4-V5 DRAW : THE FUNCTION OF "VIEW" IN TOOLBAR CANNOT BE PERFORMED NORMALLY AFTER COPY PASTE OF V4 DRAWING

APAR status

• Closed as program error.

Error description

• Scenario :
  1) Open provided model
  2) Change to "*DRAFT" tub.
  3) Double click "*DRAF" from tree, and select "ZUWAKU"
  view     with MB3.
  4) Select "Copy".
  5) Create new Drawing.
  6) Select "Sheet.1" with MB3, and select "Paste".
  .
  Result : Nothing functions normally, just "Hide/Show"
  .
  Bypass :
  .1) It saves as CATDrawing file. If the saved file is read,
  the tool bar of "View" will function normally.
  .2) Not "ZUWAKU" but "*DRAFT" is copied at the step of 3,
  the tool bar of "View" will function normally.
  

Local fix

Problem summary

• INT V4-V5 DRAW : THE FUNCTION OF  VIEW  IN TOOLBAR CANNOT BE
  PERFORMED NORMALLY AFTER COPY PASTE OF V4 DRAWING
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 11 GA level.
  .
  Activation of the sheet was not performed correctly.
  .
  ANSWER AND POSSIBLE BY-PASS:
  Activate a different sheet and came back to the first one :
  toolbar works correctly.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN

     UP

• R510 PSN

     UP