HD00864: DMUIMMERSIVE REVIEW : "STOP ON COLLISION" FUNCTION DOES NOT WORK

APAR status

• Closed as program error.

Error description

• 1. Launch CATProduct.
  2. Select Stop on collision in tools/options/dmu fitting/
      dmu manipulation.
  3. Set "Use Voxelisation for collision detection" option.
  4. Set "View collision" feedback then click on OK.
  5. Activate DMU Navigator workbench and select "Clash
  Detection (stop)" icon.
  6. Set the compass on the part "xxxx" and move it,
     in order to put the part on collision with Matrice.
  => some reds points appear, the part ejecteur does not enter
  in collision with the part "matrice".
  7. Select Tools/options/dmu fitting/dmu manipulation.
  8. Deactivate "View collision feedback" then click on OK.
  9. Move again the part "xxxx".
  => The reds points do not appears anymore, but the part
  "xxxx" does not stop, it has been moved through the part
  "matrice".
  We can note a bad behavior of this function since there is
  no "Stop on collision".
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  DMUImmersive Review :  STOP ON COLLISION FUNCTION DOES NOT WORK
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 11 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R10SP02.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R9SP06.
  
   INCIDENT DIAGNOSIS:
    a missing argument in the call of a function
  
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
    The missing argument makes the function returning
    a bad result (no clash)
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN SP50906

     UP02/12/12 N 1000

• R510 PSN SP51002

     UP03/01/15 N 1000