HC98265: GSD : FILLET THE "RADIUS" IN "GEOMETRY AREA" REMAINS EVEN IF THE PANEL IS CLOSED.

APAR status

• Closed as program error.

Error description

• Scenario :
  1) Open the CATPart
  2) Double click on an Edge Fillet feature
  --> "Edge Fillet Definition" panel appears.
  3) Click other command (for example, boundary) with keeping
  the panel Edge Fillet Definition open
  # Don't close this panel before clicking other command
  --> the definition panel of other command appears (for
  example, boundary)
  4) Click "Cancel" button of 2nd definition panel (boundary)
  to close 2nd panel
  --> The 2nd panel and "Edge Fillet Definition" panel is
  closed
  --> the "Radius" which appeared does not disappear and
  remains in geometry area.
  Why does a "Radius" remain in Geometry area?
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  FILLET RADIUS IN GEOMETRY AREA REMAINS EVEN IF THE PANEL IS
   CLOSED
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  The problem is corrected.
  
   ANSWER AND POSSIBLE BY-PASS:
  The problem is corrected.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 10 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R9SP04.
  
   INCIDENT DIAGNOSIS:
  See problem summary
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN SP50904

     UP03/08/06 N 1000