HC89447: THE DRESSUP PROPERTIES OF VIEWS ARE UNCONTROLLABLE IN THE DRAWING

APAR status

• Closed as user error.

Error description

• A center line will be displayed if two options are ON.
  MB3 on the view / Properties / View table / Dressup
          On: Hidden Lines
          On: Axis
          Off: Center lines
  With these dressup options, the center lines are displayed.
  Scenario1 :
  On <Left view>
  1-1.Open the CATDrawing file
  1-2.Activate Left view and select its properties.
  1-3.Select Properties > View tab
        Dressup---------------------
          Off: Hidden Lines
          Off: Axis
          On : Center Line
  1-4.Click Apply.
      => Center Line does not appear.
  ================================================
  1-5. Go to the next step.
        Dressup---------------------
          On : Hidden Lines
          Off: Axis
          On : Center Line
  1-6.Click Apply.
      => Center Line does not appear.
         Hidden Lines appear.
  ================================================
  1-7. Go to the next step.
        Dressup---------------------
          On : Axis
          On : Center Line
  1-8.Click Apply.
      => Center Line appears.
  .
  Scenario2 :
  On <Front view>
  2-1.Activate Front view and select its properties.
  2-2.Select Properties > View tab
        Dressup---------------------
          On : Hidden Lines
          On : Axis
          On : Center Line
  2-3.Click Apply.
      => Center Line does not appear.
  .
  Scenario3 :
  On <Bottom view>
  3-1.Activate Bottom view and select its properties.
  3-2.Select Properties > View tab
        Dressup---------------------
          Off: Hidden Lines
          On : Axis
          Off: Center Line
  3-3.Click Apply.
    => Center Line appears.
  ================================================
  3-4. Go to the next step.
        Dressup---------------------
                                Off: Axis
                                On : Center Line
                        3-5.Click Apply.
                            => Center Line does not appear.
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

•  INCIDENT DIAGNOSIS:
  There is a miss understanding between axis and centerline :
  axis is the option to display the axis of a hole (or cylinder)
  if it is viewed from the side.
  centerline is the option to display a cross that representes
  the axis of a hole (or cylinder) if it is viewed from the top.
  
   CORRECT APPLICATION:
  Axis is the option to display the axis of a hole (or cylinder)
  if it is viewed from the side.
  Centerline is the option to display a cross that representes
  the axis of a hole (or cylinder) if it is viewed from the top.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels