HC85479: SHAPE / GENERATIVE SHAPE DESIGN / OPERATIONS / TRIM

APAR status

• Closed as program error.

Error description

• Scenario:
  (1)  Open CATPart
  (2)  Click Start from the drop down menu
  (3)  Select Shape / Generative Shape Design
  (4)  Click Insert from the drop down menu
  (5)  Select Operations / Trim
       A trim definition box appears
  (6)  Select the 2 surfaces
  Catia terminates before you press ok.
  On the V5R7SP2 there is no abend but, the trim is not possible.
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  SHAPE / GENERATIVE SHAPE DESIGN / OPERATIONS / TRIM
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  There was an evaluation problem on a ProcCurve (Derivated of a
  CATCurve). This problem has been corrected.
  e.
  
   ANSWER AND POSSIBLE BY-PASS:
  None
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 8 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R*SP**.
  
   INCIDENT DIAGNOSIS:
  SHAPE / GENERATIVE SHAPE DESIGN / OPERATIONS / TRIM
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  Evaluation problem on a ProcCurve(derived of CATCurve).This
  problem has been corected.
  
   ANSWER AND POSSIBLE BY-PASS:
  None
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R507 PSN

     UP