HC83004: IN SKETCHER MODE, COPY ELEMENTS FROM ONE SKETCH AND PASTE INTO AN OTHER.CATIA LOOPS AND GET OUT OF MEMORY

APAR status

• Closed as program error.

Error description

• 1. File + Open + the CATPart
  2. Copy some elements from sktech 2
  3. Paste in sketch 1
  ===> CATIA loops and use all available free memory
       you have to kill the process
  
  If only one line is Copy/Paste the following error
  message is displayed:
  
                                          -------  ---------------
  ----------------------------            Pad.1    The specified p
  rofile contains several open                     profiles or som
  e geometry used for                              construction.
                                                   You must specif
  y the construction geometry                      to solve the pr
  ofile ambiguity.
  

Local fix

Problem summary

• In the Sketcher, Copy and Paste of some elements of a sketch
  in another Sketch generates a loop consuming all the free memory
  then CATIA crashes.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 8 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R7SP02.
  
   The loop was the result of a conflict between one copied
  element and the target Sketch.  The problem is fixed after
  algorithm modification.  No more loop occurs in this case.
  Piece of Sketch can be copied.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R506 PSN

     UP

• R507 PSN

     UP