HC82197: SHEET METAL - BAD CORNER RELIEF AND BEND EXTREMITIES BEHAVIOUR LEADS TO BAD RESULTS ON CORNER RELIEF

APAR status

• Closed as program error.

Error description

• SHEET METAL  - BAD CORNER RELIEF  AND BEND EXTREMITIES BEHAVIOUR
  LEADS TO BAD RESULTS ON CORNER RELIEF
  
  Open PIED-tole-ok.CATPart and have a look at
  CircularCornerRelief.4 : all is Ok, beautiful corner
  relief !
  Now, open PIED-tole-erreur.CATPart where the Sketch.1 has
  been modified: there's no more corner relief.
  So, open, please, PIED-tole-erreur2.CATPart and look at
  CircularCornerRelief.4 ! It has been created
  automatically after a bend on the Wall On Edge.7 had been
  asked and the Bend.19 had been deleted.
  Open PIED-tole-erreur3.CATPart : a lot of modifications
  have been done and have a look at CircularCornerRelief.3:
  it's not at the correct place !
  

Local fix

Problem summary

•  SHEET METAL - BAD CORNER RELIEF AND BEND EXTREMITIES BEHAVIOUR
   LEADS TO BAD RESULTS ON CORNER RELIEF
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 8 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R7SP05.
  
   NOTE:
  For PIED_tole_erreur2.CATPArt and PIED_tole_erreur3.CATPArt
  you just have to force update by increase decrease thickness
  in SheetMetal Parameters
  For PIED_tole_erreur.CATPArt, the bend 20 is too short,
  so you have to edit wall on edge 8 then remove "with bend"
  option then click ok
  After this step you edit one more time the wall on edge8 and
  select with bend, then, on bend created, edit the extremity
  near the corner relief (it should be rigth extremity) to set
  Maxi option in order to add material needed.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R505 PSN

     UP

• R506 PSN

     UP

• R507 PSN SP50705

     UP01/12/14 I 1000