HC75529: MD2 LICENCE SPECIFIC - CANNOT DELETE ANY PART INSERTED IN A PRODUCT - CATIA ABEND

APAR status

• Closed as program error.

Error description

• MD2 LICENCE SPECIFIC - CANNOT DELETE ANY PART INSERTED IN A
  PRODUCT - CATIA ABEND
  .
  Problem only occur in MD2 Licence -
  not with an AL2 licence
  .
  SCENARIO:
  1. Start SP50502 Catia with an AD2 license.
  2. File open and open a product.
  3. Select a part and try to delete it:
  4. CATIA returns a message box with only a exclamation mark and
  the
     part is not deleted.
  5. Select the part again and try to delete it.
  => ABEND
  .
  .
  
  
  BuildAnyFromVariant
  GetProductByIndex
  CATIAProductsImpl::Remove
  CATIAProductsImpl::operator=2..x
  ImplementationCCP_ASM::Remr=2..x,.
  ImplementationCCP_ASM::oper=2..x,....
  CATCCP_Actor::Cut
  fctCreateCATMcoDeleteCmd
  fctCreateCATMcoDeleteCmd
  CATDiaActionEngine::Execute
  CATDialogTransition::Execue.. :
  CATECmdCommandEngine::Anale....:
  CATECmdCommandEngine::Teste......:
  CATECmdCommandEngine::Actie........:
  CATStateCommand::ActivateCB   :
  CATCommand::ReceiveNotificB.. :
  CATNotifier::DoOtherSend      :
  CATNotifier::DoOtherList      :
  CATNotifier::ExecuteReceive   :
  CATNotifier::CallReceive      :
  CATNotifier::PutSend          :
  CATCommand::SendNotification. :
  l_CATDialog::SendNotificaton...:
  l_CATDialog::Advise           :
  l_CATDlgPushItem::Dispatch..  :
  ?Unknown?                     :
  

Local fix

• BYPASS
  Making in comment the line
  # StructureCfg     CATIPRDWorkshopConfiguration   libCATStr..
  located in the file
  "intel_a\code\dictionnary\StructureUI.dic"
  .
  .
  Note that this problem only happens when a customer uses
  a partial licence (=MD2,HD2,MDE,..) on a full  AL2
  installation.
  For example if you install only MD2 and use a MD2 licence
  you will not get any abend.
  Olivier
  

Problem summary

•  INCIDENT DIAGNOSIS:
   RESTRICTED LICENCE ON AL2 INSTALLATION
   CANNOT DELETE ANY COMPONENT INSERTED IN A PRODUCT
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 6 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R5SP04.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  During the delete, an attempt to load non-licensed code (cod
  e
  available with AL2 but not MD2) was done, leading to an aben
  d.
  
   ANSWER AND POSSIBLE BY-PASS:
  Install MD2 only when using a MD2 license.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5 NT_INT

• Fixed component ID

  569151000

Applicable component levels

• R505 PSN SP50504

     UP01/03/01 N 1000