HC46256: ROBUSE : ROBOT CANNOT BE MOVED CORRECTLY

APAR status

• Closed as program error.

Error description

• Scenario:
  --------
    1. FILE / READ to read the provided model
    2. Select TRANSFOR / CREATE
    3. Keyin Y
    4. Keyin 1000
    5. Select TRANSFOR / STORE /
    6. YES
       Then, *TRA4461 is created
    7. Select ROBUSE / ROBOT
    8. Select ROBUSE / MANUAL PLASE / ROBOT
       Select $2SA160F
    9. Select TRANSFORM
    10. Select *TRA4461
  ====> Then, message  Empty batch  is issued and ROBOT is not
        moved following transformation.
        ROBOT is moved after SW/BR..., but NO key does not work
        at that time.
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  A problem occurs when making a transformation on robot geometric
  sets.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 4 RELEASE 2.1 REFRESH 1 GA level  (FREL421R1)
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  One of the sets used by the robot is empty, it is why the "empty
  batch" messages has displayed.
  
   ANSWER AND POSSIBLE BY-PASS:
  The problem is fixed now.
  By pass : to create a gemetric element (point) in the empty set
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  HC46258 HC46260 HC46262

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA FOR AIX

• Fixed component ID

  562610000

Applicable component levels

• R421 PSN UB92110

     UP99/06/03 I 1000