HC43771: SOLIDE / OPERATN / FILLET / EDGE FAILS WITH COLLISION DETECTED BETWEEN EDGES ERROR MESSAGE - THIS PROBLEM ONLY OCCURS ON AIX

APAR status

• Closed as Permanent restriction.

Error description

• .
  FUNCTION:
  ---------
  .
  SOLIDE / OPERATN / FILLET / EDGE
  .
  SCENARIO:
  ---------
  .
  1 - READ THE MODEL
  2 - SELECT THE SOLIDE / OPERATN / FILLET / EDGE
  3 - SELECT THE EDGE YOU WANT TO FILLET
  4 - KEY IN THE FILLET RADIUS VALUE
  5 - YES: COMPUTE
  RESULT: FILLET CREATION FAILS WITH COLLISION DETECTED BETWEEN
          EDGES.
  .
  /HELP:
  ------
  .
  A COLLISION BETWEEN EDGES HAS BEEN DETECTED AT INDICATED POINT
  THIS WOULD LEAD TO AN INVALID FACE.
  .
  

Local fix

Problem summary

• .
  SOLIDE / OPERATN / FILLET / EDGE LEADS TO COLLISION DETECTED
  BETWEEN EDGES ERROR MESSAGE.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  .
  CLOSURE TYPE: PRS
  -------------
  .
  TECHNICAL EXPLANATION FOR THE RESTRICTION:
  ------------------------------------------
  .
  With the selected radius value, we are too close to the
  tolerances values and this leads to confusing situation
  which makes the fillet fails. Tolerances cannot be
  modified without having an important risk of regression
  .
  By-Pass:
  --------
  .
  A very slight decrease of the fillet radius value allow to
  compute the fillet
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

  HC43763

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels