AMM (Advanced Management Module) Networking Configuration

Troubleshooting

Problem

This document has screen shots showing how to check the IP configuration in AMM (Advanced Management Module).

Resolving The Problem

This document has screen shots showing how to check the IP configuration in AMM (Advanced Management Module). It highlights areas that have caused network conflicts with i5 partitions in the past.

Check for duplicate IP addresses by checking the AMM assigned IP address and I/O module IP addresses. Log on the BladeCenter (AMM - Advanced Management Module) by going to https://bladecenter (specify the TCP/IP address or the DNS name of the BladeCenter).

AMM assigned IP address:

This is the management module network interface panel.

IO Module IP address:

I/O Module Configuration panel

CIN should be disabled in most configurations:

This is the MM Control Chassis Internal Network panel.

Nortel switch configuration (should be set this way by default only and must be checked if changes have been made):

This screen shows the Nortel switch dashboard settings.

This is the Nortel Switch port configuration panel.

This is the Nortel Mac address configuration panel.
This is the Nortel routing configuration panel.

[{"Product":{"code":"SWG60","label":"IBM i"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Blade","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"Version Independent","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Historical Number

552256619

Was this topic helpful?

Document Information

More support for:
IBM i

Software version:
Version Independent

Operating system(s):
IBM i

Document number:
706531

Modified date:
18 December 2019

UID

nas8N1012475

IBM Support

Tips