IBM Support

Switch error messages - IBM BladeCenter T (Type 8720, 8730)

Troubleshooting


Problem

Switch error messages for IBM BladeCenter T (Type 8720, 8730)

Resolving The Problem

 View service part numbers for IBM BladeCenter T (Type 8720)
 View service part numbers for IBM BladeCenter T (Type 8730)

Message
Action
Switch fault x
  1. Reseat switch x.
  2. Replace switch x.
Switch module x was removed
Information only. Take action as required.
Switch module x was installed
Information only. Take action as required.
Switch module x was powered on
Information only. Take action as required.
Switch module x was powered on
Information only. Take action as required.
Switch System running nonredundant switch modules
Information only. Take action as required.
Switch module%d IP configuration was changed
Information only. Take action as required.
ENET [X] DHCP HSTN=X, DN=X, IP @= XXX.XXX.XXX.XXXGW @= XXXX.XXX.XXX.XXX, SN= XXX,XXX,XXX,XXX, DNS1@= XXX.XXX.XXX.XXX
Ethernet configuration information. Take action as required.
ENET [X] IP Cfg:HstName= XXXX, IP@= XXX.XXX.XXX.XXX ,GW@= XXX.XXX.XXX.XXX, NetMsk= XXX.XXX.XXX.XXX Switch module x was installed
Ethernet configuration information. Take action as required.
LAN: Ethernet [x] interface is no longer active
Check cables to switch.
LAN: Ethernet [x] interface now longer active
Information only. Take action as required.

 

Document Location

Worldwide

Operating System

BladeCenter:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20M","label":"BladeCenter->BladeCenter T Chassis"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
29 January 2019

UID

ibm1MIGR-56919