Remote Supervisor Adapter II firmware update v1.08 - IBM System x3250 (4364, 4365, 4366)

Download Description

• New IBM xSeries firmware and device driver file naming convention

Severity: Suggested

Version 1.08, G9EP16A
Problem(s) Fixed:

• Failed to connect to RSA via hostname after DHCP lease time expires

Enhancement:
Limitations:
Dependencies:

Version 1.07 - Build ID: G9EP15A

Problem(s) Fixed:

• Failed to send out alerts via SMTP
• DDNS can't save domain name of 255 characters
• Remote Control freezes or goes blank
• Unable to save or do NTP time synchronization
• LDAP config changes appear to corrupt the web interface
• Can't restore to default for the "prevent repeat keystroke"
• Remote control preferences link disappears if new key buttons are added

Enhancement: none.
Limitations: none.
Dependencies: none.

Version 1.06 - Build ID: G9EP14A

Problem(s) Fixed:

• Fixed RSA COM2 console redirection lost during linux installation

Enhancement: none.
Limitations: none.
Dependencies: none.

Version 1.05 - Build ID: G9EP13A

Problem(s) fixed:

• Corrected flash utility in Linux 64-bit fails to identify chipset problem.

Enhancement: none.
Limitations: none.
Dependencies: none.

Version 1.04 - Build ID: G9EP12A

Problem(s) fixed: none.
Enhancement:

• Added features for Flash Utility.

Limitations: none.
Dependencies: none.

Version 1.03 - Build ID: G9EP11B

Problem(s) fixed: none.
Enhancement:

• Support new machine type 4366
• Support IE7

Limitations: none.
Dependencies: none.

Version 1.03 - Build ID: G9EP11A

Problem(s) fixed:

• RSA event logs for the event pool saturation

Enhancement:

• Dot cmd fails while RSA tries to acquire IP address

Limitations: none.
Dependencies: none.

Version 1.02 - Build ID: G9EP10A

Problem(s) fixed:

• Improved the HDD status reported from DASD BP
  
• Default account password command appears as unsupported
  
• Alerting on Event Log FULL events not sent to remote recipients
  
• CLI group filter change does not reflect on SP Web interface
  
• Save button assigns info on an empty alert recipients
  
• Web interface does not allow Event Log sys alert to be selected
  
• RSA2: ASM time does not sync to NTP server
  
• RSA CLI ldap -p command does not change password
  
• RSA2: write protect toggle does not function
  
• Remote Control doesn't work with Network Address Translation
  
• Change web to permit DST for western Australia
  
• Web page displaying and remote control don't work normally
  

Enhancement:

• RSA flags only Quad Bus B on a failure of both Quad Buses A & B
  
• Update POST/BIOS/SMI SEL messages to v1.12
  
• Mozilla support for remote port
  
• delete notice message during login via LDAP
  
• Add support for 16 drives
  

Limitations: none.
Dependencies: none.

Version 1.01 - Build ID: G9EP09A

Problem(s) fixed:

• Improved the handling of invalid network data to make the Remote Supervisor Adapter II more robust
  
• Corrected the IP address reported in the Service Location Protocol data. When one of the "dot" fields is set to 0, the Remote Supervisor Adapter II previously reported the address field as "000" instead of just "0". IBM Director will not recognize IP addresses reported with multiple 0's ("000") in the fields.
  

Enhancement:

• Added support for the year 2007 US Daylight Saving Time changes
  
• Added a feature to lockout the command line interface for a period of time after 5 unsuccessful login attempts
  
• Added support for md2WithRSAEncryption certificates
  
• Support for server models with Quad-Core Intel Xeon processors
  

Limitations: none.
Dependencies: none.

Version 1.0 - Build ID: G9EP08A

• Initial release.