Remote Supervisor Adapter II firmware update v1.10 (Linux) - IBM eServer xSeries 336

Download Description

Note: You now have two ways of downloading files with the *.sh extention. You can use either the IBM Download Director, or the HTTP protocol to download these files. Do NOT use FTP as this will only cause the file to open your browser.

New IBM xSeries firmware and device driver file naming convention

Version 1.10, APEP26B
Problem(s) Fixed: Suggested-

• Fix for Remote Control General Exception in JRE 1.6 update 12 and above.
  

Enhancement:
Limitations:
Dependencies:

Version 1.09, APEP26A

Problem(s) Fixed:

• Corrected syntax errors and seg fault errors that occurred in lflash.
• Corrected the flash utility to support the 64-bit version of Windows Server 2008
• Corrected a problem where some alert settings become unselected after updating the Remote Supervisor Adapter II firmware.
• Reduced the number of event log entries that are generated when accessing the Remote Supervisor Adapter II via SNMP.
• Corrected a problem where the NTP update frequency could be incorrectly displayed.
• Corrected a remote disk read error that could occur when uploading images through the Remote Supervisor Adapter II.
• Corrected a problem that caused the media check operation of a remotely mounted ISO image to fail.
• Fixed a problem that prevented e-mail alerts from working with some mail servers.
• Corrected a problem that prevented the Network Time Protocol configuration from being accessed from an SNMP client.
• Corrected the SNMP MIB to remove a duplicate tcpcmdPortAssignment entry.
• Fixed a problem that caused the copying of files to a remote USB Key to fail.
• Fixed an intermittent problem that sometimes caused the screen capture, which occurs when the server hangs, to display some black lines.
• Corrected a problem that sometimes caused the Remote Supervisor Adapter II network settings to be changed after updating the firmware.
• Changed the SNMP Trap code for the system event log 75% full condition from 39 to 35, to match the MIB.

Enhancement:

• Added support for the IBM Enhanced Role Based Security Snap-in Utility ("ldap snap-in tool ")
• Support for the Remote Supervisor Adapter II has been added to version 2.1 and later of the snap-in utility.
• Added support for multiple NTP servers.
• Added the ability to permit SSHv2 only support.
• Added a command to the command line interface to disable the Remote Supervisor Adapter II firewall.

Version 1.08, APEP25A

Problem(s) Fixed:

• Permit simultaneous remote mounting of IMG and ISO files.
• Improved the handling of invalid network data to prevent the network connection from hanging.
• Enable SNMP alerts to be sent for a hard drive fault recovery
• Corrected a problem where the Write Protect selection did not work on remote USB key mounts
• Corrected a problem where after accessing the Remote Supervisor Adapter II from 4 different SNMP hosts, accesses from other hosts were not allowed.
• Permit writes of large files (larger than 10MB) to remotely mounted USB key
• Corrected a problem where the web interface could not be accessed after using address redirection
• Corrected a problem that caused certificate commands sent to the Remote Supervisor Adapter II by the Advances Settings Utility v2.1 or higher to intermittently fail.
• Corrected a problem where performing an SNMP query from any host when using 0.0.0.0 in the first hostname of the first community fails.
• Prohibit multiple login profiles from being created with the same user name.

Enhancement:

• Added support for western Australia and New Zealand Daylight Savings Time
• Added support for the Remote Desktop Protocol

  Note: this feature is available only for servers and clients running Windows operating systems. The IBM Remote Supervisor Adapter II Windows Terminal Services Bridge must be installed on the server to use this feature.

Limitations:
Dependencies:

Version 1.07 - APEP24A

Problem(s) Fixed:

• Improved the handling of invalid network data to prevent the network connection from hanging.
• Fixed a problem where an SNMP walk through query of the system health could loop infinitely.
• Fixed a problem where the user either sees a blank web page or a timeout for the page not loading. The problem can occur in three scenarios:
  • 1) The maximum number of failed attempts to log into the RSA-II web interface has been reached. Normally, a page stating "Too many unsuccessful login attempts have been detected." would have been displayed.
  • 2) When the maximum number of sessions are already in use. Normally a page stating "All sessions are currently in use. Try again later." would have been displayed.
  • 3) The web session lost due to someone else logging in with the same user id. Normally a page stating "Your session has terminated because you logged in with this userid at another location." would have been displayed.

Enhancement:

• Allow larger size certificates to be imported. Increased the maximum allowable certificate size from 2039 to 5112 bytes.

Limitations: None.
Dependencies: None.

Version 1.06 - APEP23A

Problem(s) Fixed:

• Corrected a failure to copy large files from a remote floppy drive.
• Corrected a problem that intermittently caused the Remote Supervisor Adapter II to not respond to SNMP requests if the Remote Supervisor Adapter II is sent multiple SNMP requests while being reset.
• Corrected the write-protect selection of the remote media feature.
• Corrected a problem that prevented the Remote Control feature from working with clients when Network Address Translation is used.

Enhancement:

• Added Swiss-German keyboard support.
• Added the ability to set password policies for local Login IDs.
• Added Network Time Protocol support.
• Added the ability to select individual "Get" and "Set" access authority for each SNMPv1 community.
• Added USB key support to the remote media feature
• Added support for setting the LDAP and SSL configuration using the Command Line Interface.
• Added the ability to send remote alert notifications when login attempts repeatedly fail.
• Added support for Internet Explorer 7
• Added support for western Australia Daylight Saving Time changes

Limitations: None.
Dependencies: None.

Version 1.05 - APEP20B

Problem(s) Fixed:

• Improved the handling of invalid network data to prevent the network connection from hanging.
• Corrected the IP address reported in the Service Location Protocol data. When one of the "dot" fields is set to 0, the Remote Supervisor Adapter II previously reported the address field as "000" instead of just "0". IBM Director will not recognize IP addresses reported with multiple 0's ("000") in the fields.
• Corrected a problem that caused the loss of the remote keyboard function in the Remote Control feature
• Corrected a problem where the Remote Control video locks with constant remote video scrolling

Enhancement:

• Added support for md2WithRSAEncryption certificates
• Added a user choice to allow or disallow wildcards in the group name
• Added nested LDAP group membership support for Active Directory environments
• Updates to handle voltage alerting changes in BMC version 1.19

Limitations: None.
Dependencies:

• Voltage alerting changes have been made to the BMC firmware version 1.19. To handle these changes, IBM Remote Supervisor Adapter II version 1.05 or later is required.

Version 1.04 - APEP19A

• Fixed German keyboard support for Linux clients.
• Fixed Maximum Segment Size negotiation on the network interface.
• Fixed the stuck key problem that occurs when using Ctl+Esc or Alt+Esc to switch between windows on a remote control client.
• Corrected the media check failure that occurs when remotely attempting to install some versions of Red Hat Linux.
• Corrected a problem which caused the Remote Supervisor Adapter II to not renew its DHCP lease when the DHCP server is not on the same subnet mask/network as the Remote Supervisor Adapter II.
• Fixed a problem which caused the Remote Supervisor Adapter II not to reaquire a new IP address when the former address is lost.
• Fixed a newtork Time to Live problem that causes LDAP to fail when it goes through the list of pre-configured LDAP server names.
• Corrected an SSL client problem that prevented the download of a Certificate Signing Request.
• Make the system Blue LED blink during the system Power ON Self Test.
• Fix the SNMP Set command to enable or disable TCP command mode.
• Stopped generating the periodic SMIs used for Machine Check Architecture support.
• Add support for OpenLDAP.
• Changed maximum size of login string from 32 to 64 to support longer UPN or DN names.
• Added French-Canadian keyboard support.
• Added the ability to control the Locator LED on the user interfaces.
• Added support to authenticate through LDAP using an account that had the display name and SAMAccount name set to different values.
• Permit the use of spaces in the LDAP Group Name Field.
• Add SSL support to TCP Command mode.

Version 1.03 - APEP14A

• If the Remote Supervisor Adapter II is unable to read the server's machine type, or if the machine type is different than expected, an error log warning is generated asking the user to ensure that the Remote Supervisor Adapter II is flashed with the correct firmware.
• Add 64-bit support to the lflash utility.
• Allow BIOS to disable the periodic SMIs that are generated by the Remote Supervisor Adapter II.

Version 1.02 - APEP12A

• Corrected a problem where the server could become non-responsive 76 days after the Remote Supervisor Adapter II has been reset.
• Corrected a situation that caused the remote control session on the client to drop intermittently.
• Corrected intermittent POST 175, 177, and 1602 errors.

Version 1.01 - APEP09A

• Speed up gathering of the Sensor Data Records from the BMC.

Version 1.00 - APEP06A

• Initial release.