Remote Supervisor Adapter firmware update (Microsoft Windows package) - IBM eServer xSeries 345

Download Description

Information and instructions for the UpdateXpress Web package

New IBM xSeries firmware and device driver file naming convention

Severity: Suggested

Version 1.10 - GEET24A

Problem(s) Fixed:

Enhancement:

• Added support for the year 2007 US Daylight Saving Time changes
• Added Daylight Saving Time support for western Australia

Limitations:
Dependencies:

Version 1.09 - GEET23B

• Corrected a counter problem that could result in a server clock skew in certain IBM Director environments
• Fixed a Maximum Segment Size negotiation problem on the network interface which could have prevented oversized data packets from being delivered
• Corrected a problem which caused the Remote Supervisor Adapter to not renew its DHCP lease when the DHCP server is not on the same subnet mask/network as the Remote Supervisor Adapter
• Fixed a problem which caused the Remote Supervisor Adapter not to reaquire a new IP address when the former address is lost
• Corrected a problem that caused the Remote Supervisor Adapter to report the final hours of April 30th in certain time zones as April 31st
• Allow dashes in the LDAP ASM Group Filter Name
• Increased the time to live to 128 on all packets from the Remote Supervisor Adapter to accommodate an increased number of network hops

Version 1.08

• Included new MIB files and SNMP corrections

Version 1.07

• The DMCFLASH.PKT file is now located on the ISMP firmware update diskette. Removed the ISMP firmware packet from the diskette
• When flashing a device while logged in to Remote Supervisor adapter in command mode, an incorrect flash finished message is generated
• Corrected an error where a power supply voltage error was not reported

Version 1.06

• Picked up latest ISMP firmware update
• Corrected problem with storing administrator password
• Prevented the Telnet login screen from displaying during a remote graphics session
• Corrected a problem where "firmware update" was given as a popup help screen when "remote boot" was in progress

Version 1.05

• Corrected a problem saving the Remote Supervisor Adapter configuration through the Web

Version 1.04

• Picked up the latest ISMP firmware update (1.04)

Version 1.03

• Corrected issue of CPU temperatures not showing up over ASM interconnect
• Web interface now shows the 1.25V value
• Enabled PXE boot support
• Fixed serial interface command mode problem
• Added changes to support the 533 MHz FSB

Version 1.02

• Added power supply status command
• Picked up the latest ISMP firmware update

Version 1.01

• Picked up the latest ISMP firmware update

Version 1.00

• Initial release