Remote Supervisor Adapter Firmware (Linux update package) - IBM eServer xSeries 335

Download Description

New IBM xSeries firmware and device driver file naming convention

Note: You now have two ways of downloading files with the *.sh extention. You can use either the IBM Download Director, or the HTTP protocol to download these files. Do NOT use FTP as this will only cause the file to open your browser.

Version 1.09, T2ET21A

Problem(s) Fixed:

Enhancement:

• Added support for the year 2007 US Daylight Saving Time changes
• Added Daylight Saving Time support for western Australia

Limitations:
Dependencies:

Version 1.08, T2ET19B

• Corrected a problem that prevented remote text from being displayed when the server POST starts.

Version 1.07, T2ET19A

• Supports capture of Windows 2003 Blue Screen information
• Stopped the "Service Processor not configured for static partition" message from appearing in the event log - it does not apply to this server.
• Removed the ISMP firmware packet from the diskette. The DMCFLASH.PKT file is now located on the ISMP firmware update diskette.
• Corrected a problem where a restart issued using SNMP logged the wrong IP address.
• Added an event for Remote Supervisor Adapter reset

Version 1.06, T2ET17A

• Remove build ID from the log message generated when an ASM remote flash is performed
• Improved the log message generated when a remote flash is performed over a command mode session

Version 1.05, T2ET16A

• Include latest ISMP firmware update
• Correct an issue where remote graphics will hang if too much mouse or keyboard data is input at once

Version 1.04, T2ET15A

• Correct problem where remote graphics interface will hang when data is input too rapidly
• Added a feature to allow only a 25 line display when communicating with another ASM while in text mode

Version 1.03, T2ET14A

• Support new hardware part for system EEPROM
• Corrected problem where consecutive TELNET sessions cannot be made
• Fixed issue where remote text redirection over ASM interconnect locks up

Version 1.02, T2ET12A

• Show 1.25 voltage on the Web interface
• Prevent flashing incorrect version of ISMP firmware

Version 1.01, T2ET10A

• Fixed Remote Supervisor Adapter interconnect login problem

Version 1.00, T2ET08A

• First release