Remote Supervisor Adapter Firmware update diskette - IBM eServer xSeries 235

Download Description

	New firmware update file formats
	New IBM xSeries firmware and device driver file naming convention

Version 1.09

Problem(s) Fixed:

Enhancement:

• Added support for the year 2007 US Daylight Saving Time changes
• Added Daylight Saving Time support for western Australia

Limitations:
Dependencies:

Version 1.08

Problem(s) Fixed:

• Corrected a counter problem that could result in a server clock skew in certain IBM Director environments.
• Fixed a Maximum Segment Size negotiation problem on the network interface which could have prevented oversized data packets from being delivered.
• Corrected a problem which caused the Remote Supervisor Adapter to not renew its DHCP lease when the DHCP server is not on the same subnet mask/network as the Remote Supervisor Adapter.
• Fixed a problem which caused the Remote Supervisor Adapter not to reaquire a new IP address when the former address is lost.
• Corrected a problem that caused the Remote Supervisor Adapter to report the final hours of April 30th in certain time zones as April 31st

Enhancement:

• Allow dashes in the LDAP ASM Group Filter Name
• Increased the time to live to 128 on all packets from the Remote Supervisor Adapter to accommodate an increased number of network hops.

Limitations:
Dependencies:

Version 1.07

• Corrected problem with DNS Enable/Disable causing confusion due to case sensitivity/inconsistency
• Corrected the problem with Event Action Plan not occurring
• Corrected the problem with RSA rebooting with port scan running
• Corrected the problem with not being able to access scalable partition settings

Version 1.06

• Removed the ISMP firmware packet from the diskette. The DMCFLASH.PKT file is now located on the ISMP firmware update diskette.
• Corrected a problem that caused the connection to drop during a remote graphics session.

Version 1.05

• Changed build ID numbers that were not used to not appear on the Web interface
• Changed VRM information message to severity ERROR
• Picked up the latest ISMP firmware update
• Fixed an issue where resetting the ASM caused it to respond to commands very slowly
• Created new error log message for the case when the server has an incorrect VRM and/or CPU configuration
• Corrected an error log message via the ASM interconnect that reported a power supply over voltage incorrectly
• Corrected an alert where if powergood has been detected to be in low range an error is generated instead of a warning
• Corrected an issue where remote graphics hangs if keyboard or mouse data is input too rapidly
• Enable PXE boot support

Version 1.04

• Corrected an alert where a power good fault generated an error instead of a warning
• Corrected an issue where remote graphics hangs if keyboard or mouse data is input too rapidly
• Fixed an issue where resetting the ASM caused it to respond to commands very slowly
• Created new error log message for the case when the server has an incorrect VRM and/or CPU configuration
• Corrected an error log message via the ASM interconnect that reported a power supply over voltage incorrectly
• Picked up the latest ISMP firmware update
• Enabled PXE boot support
• Made changes to support 533 FSB

Version 1.03

• Fixed an issue where resetting the ASM caused it to respond to commands very slowly
• Created new error log message for the case when the server has an incorrect VRM and/or CPU configuration
• Corrected an error log message via the ASM interconnect that reported a power supply over voltage incorrectly
• Picked up the latest ISMP firmware update
• Enable PXE boot support
• Changes to support 533 FSB
• Fixed ASM interconnect issue when some machines fail to show up in the peer table
• Prevent remote supervisor adapter from receiving alerts over ASM interconnect and locally if it is incorrectly connected

Version 1.02

• Enabled PXE boot support
• Fixed ASM interconnect issue when some machines fail to show up in the peer table
• Prevented remote supervisor adapter from receiving alerts over ASM interconnect and locally if it is incorrectly connected
• Clarified ASM interconnect hard drive and CPU warning
• Corrected warning voltage threshold via ASM interconnect
• Translated LSI BIOS message in log

Version 1.01

• Picked up the latest ISMP firmware update

Version 1.00

Initial release