Troubleshooting
Problem
Instructions for removing the cover
Resolving The Problem
The following information describes how to remove the cover.
Removing the cover from the server
- Turn off the server and all attached devices and disconnect all external cables and power cords.
- Remove the server from the rack.
- Remove the two screws from the rear of the server.
- Pull out on the cover release lever at the back of the server, to release the cover.
- Slide the cover back, then up and off the server.
WARNING: For proper cooling and airflow, replace the cover before turning on the server. Operating the server for extended periods of time (over 30 minutes) with the cover removed might damage server components.
- Remove the clear shield that covers the inside of the server.
Note: It is not necessary to remove the shield when you are installing memory modules or installing an adapter in the PCI slots.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18E","label":"Older System x->xSeries 135"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18L","label":"Older System x->xSeries 330"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HWP99","label":"IntelliStation Pro->IntelliStation R Pro"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-45131