IBM Support

Special instructions for Processor Sub Advanced Systems Management - IBM eServer xSeries 450

Product Documentation


Abstract

Special Instructions for Processor Sub Advanced Systems Management for IBM xSeries 450 not covered by Standard documentation.

Content

Option Description
Instructions
Processor Sub ASM
  1. Gradually drop the Processor Sub ASM into the chassis cavity.
  2. Make sure that the height of the work bench is appropriate for your height.
  3. Place the chassis as close to you as possible.
  4. There is very little room between the Sub ASM and Chassis cavity wall but you should be able to maneuver around the Chassis cavity.
  5. Use the guides on the side of the shell cavity.
  6. Once the Sub ASM is lowered and sitting on the bottom of the chassis, latch the two blue latches. This will make the Sub ASM move towards the Midplane card.
    x350p1.jpg
    Note: There are three verically alligned guide pins inside the chassis cavity on the left and right side as well as one additional big head screw shown above. Use the guide pins to install the Processor Sub ASM.
    x350p2.jpg
    Note: Carefully lowering the Sub ASM into the chassis cavity.
    x350p3.jpg
    Note: Place your hands as shown using your thumbs to advance the Sub ASM forward. Engage the lever latches and connectors that's in front of you.
    x350p4.jpg
    Note: Move each latch towards you. Engage each latch by pressing downward on each latch..
Back to top

 

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19W","label":"Older System x->xSeries 450"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-60830

Page Feedback