Features and specifications - IBM eServer xSeries 230

Content

The following provides a summary of the features and specifications for the eServer xSeries 200 server. Depending on the server model, some features and specifications might not apply.

• Intel Pentium III microprocessor with MMX technology and SIMD extensions
• 256KB Level-2 cache (min.)
• Supports up to two microprocessors

• Standard: 128MB
• Maximum: 4GB
• Type: 133MHz, ECC, SDRAM, Registered DIMMs
• Sockets: 4 dual inline sockets

• Diskette: 1.44MB
• CD-ROM: 40X IDE

• Hot-swap: 6 slim high or 3 half high
• Non-hot-swap: Three 5.25 inch (one used by CD-ROM drive)

• Three 33MHz/ 64-bit slots
• Two 33MHz/ 32-bit slots

• Standard: One, non-hot-swappable
• Maximum: Three, only with optional power backplane that enables multiple power supplies and hot-swappability

• S3 Savage 4 video controller (integrated on system board)
• Compatible with SVGA and VGA
• 4 MB video memory

• Height: 220mm (8.7 in.)
• Depth: 630mm (24.8 in.)
• Width: 440mm (17.3 in.)
• Weight: approximately 27.22 Kg (60 lb.) when fully configured

• Height: 440mm (17.3 in.)
• Depth: 660mm (26.0 in.)
• Width: 220mm (8.7 in.)
• Weight: approximately 27.22Kg (60 lb.) when fully configured

• Netfinity Advanced System Management processor
• Dual channel Ultra2 SCSI controller (both channels internal)
• One 10BASE-T/!00BASE-TX AMD Ethernet controller
• One S3 Savage 4 video controller
• Two serial ports
• One parallel port
• Two Universal Serial Bus (USB) ports
• Keyboard port
• Mouse port
• Video port

• Sound power, idling: 6.0 bel maximum
• Sound power, operating: 6.0 bel maximum
• Sound pressure, operating: 45 dBa maximum
  

Air temperature

• Server on: 10° to 35° Celsius (50.0° to 95.0° Fahrenheit). Altitude: 0 to 914m (2998.7 ft.)
• Server on: 10° to 32° Celsius (50.0° to 89.6° Fahrenheit). Altitude: 914m (2998.7 ft.) to 2133 m (6998.0 ft.)
• Server off: 10° to 43° Celsius (50.0° to 109.4° Fahrenheit). Maximum altitude: 2133m (6998.0 ft.)

Humidity

• Server on: 8% to 80%
• Server off: 8% to 80%

Approximate heat output in British Thermal Units (BTU) per hour:

• Minimum configuration: 683 BTU (200 watts)
• Maximum configuration: 2048 BTU (600 watts)

• Sine-wave input (50-60Hz) required
• Input voltage low range:
  • Minimum: 90V AC
  • Maximum: 137V AC
    
    
• Input voltage high range:
  • Minimum: 180V AC
  • Maximum: 265V AC
    
    
• Input kilovolt-amperes (kVA) approximately:
  • Minimum: 0.08 kVA
  • Maximum: 0.42 kVA