IBM Support

Overview - Netfinity 36.4 GB UW SCSI Hot-Swap/SL hard disk drive

Product Documentation


Abstract

Features and technical details of the Netfinity 36.4 GB UW SCSI Hot-Swap/SL hard disk drive

Content

General information
Netfinity servers supporting Ultra SCSI hot-swap hard disk drives (HDDs) can be updated to the latest 7,200 rpm and 10,000 rpm drive technologies. These new, 1-inch, slim-high form factor drive options allow you to double the storage capacity of supported Netfinity servers.
The NETFINITY 36.4 GB(1) 10K WIDE ULTRA SCSI HOT-SWAP SL HDD and the NETFINITY 36.4 GB WIDE ULTRA SCSI HOT-SWAP SL HDD options are supported in the following Netfinity servers:

  • Netfinity 5000
  • Netfinity 5500
  • Netfinity 5500 M10
  • Netfinity 5500 M20
  • Netfinity 7000
  • Netfinity 7000 M10
These HDD options are SCA-2 compliant and are mounted on hot-swap trays. This improves reliability by making a direct hot-swap connection. In addition, they contain the Predictive Failure Analysis (PFA) feature,that when combined with Netfinity Manager or Netfinity Director, can alert you of impending drive failures so replacements can be made before a problem occurs.
In addition to doubling data storage capacities,these HDD options have been rigorously tested for compatibility and reliability with supported Netfinity products through the ServerProven program. This extra testing gives you the confidence these options will perform with consistency and reliability in your demanding enterprise server environment.
  • Significantly improve storage capacity by deploying the latest slim-high Netfinity 36.4 GB hot-swap HDD options in Ultra SCSI Netfinity servers.
  • High-performance 10,000 rpm and cost-effective 7,200 rpm versions
  • Advanced areal density technology - doubles capacity of most Netfinity servers
  • Excellent performance
  • Solid reliability
  • Predictive Failure Analysis (PFA)
  • Rigorously tested in heavy network simulation test suites for optimized reliability and compatibility in your Netfinity server
  • SCA-2 compliant
  • Pre-mounted on hot-swap trays for simplified installation
  • Three-year, limited warranty
Warranty
3 year limited customer carry-in exchange
Packaging
You will receive one box containing the following items:
  • 36.4 GB HDD
  • HDD assembly mounted on a Netfinity hot-swap tray
  • Installation publications and warranty

Product marketing and replacement part numbers (FRU)
Part numbers applicable to: World Wide

* Withdrawn - no longer available for purchase through IBM

  • Marketing part number: 37L7199*
  • Replacement part number (FRU): 09N0947
Product dates
World Wide
  • Announce date: 06/27/2000
  • Planned availability date: 06/27/2000
  • Withdrawal date: 03 August 2001

Technical specifications
Performance specifications as known at time of announcement

Formatted capacity: 36,400 MB

Rotational speed: 7,200 rpm

Average seek time (Read): 7.0 ms or less

Burst transfer rate (maximum): 40 MB/s

Average latency: 4.17 ms

Interface: Wide Ultra SCSI-3

Physical, environmental, and compatibility specifications as known at time of announcement
Weight

1.54 lbs

700 g

Height

1.0 inches

25.4 mm

Width

4.0 inches

101.6 mm

Depth

5.75 inches

146.0 mm

Relative humidity

Operating: between 8% and 80% (non-condensing)

Altitude

10 to 35 degrees C (50 to 95 degrees F) at 0 to 914 m(0 to 3,000 ft)

10 to 32 degrees C (50 to 90 degrees F) at 914 m to 2,133 m(3,000 to 7,000 ft)

Agency approvals

UL

CSA

TUV

CE Mark

C-Tick Mark (AS/NZS 3548 Class A)

IEC

Taiwan (BSMI Type Certification)

Korean EMI

ENERGY STAR-Compliant

No . The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware requirements for IBM systems

The Netfinity 36.4 10,000 rpm and 7,200 rpm HDD options are supported only in the hot-swap drive bays of the following supported Netfinity servers. They must be attached to either the standard RAID controller, the standard SCSI controller, or to a supported RAID or SCSI adapter(*).

Hardware requirements for non-IBM systems

Not applicable

Software requirements

There are no software requirements. These drive options are compatible with the network operating systems supported by the servers or external storage units in which they are installed.

Compatibility

These HDD options adhere to the SCSI-3 ANSI X3.131:1994 standard and are designed to be compatible with systems configured with Wide Ultra SCSI and SCSI-2 controllers that support this specification.

Limitations

None

Document notes:

The symbol * means that the information is currently unavailable for this product.

All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).

FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.

Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.

Document Location

Worldwide

Operating System

System x Hardware Options:All operating systems listed

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00HYX","label":"System x Hardware Options->Hard drive - SCSI (Hot-Swap)->36 GB->37L7199"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-4LPJAM

Page Feedback