Product Documentation
Abstract
Source Hardware Maintenance Manual Power supply controls and indicators Power supply LED indications
Content
Source
Hardware Maintenance Manual
Power supply controls and indicators
Power supply LED indications
| LED | Description |
|---|---|
| Power (green) | LEDs are on when power switches are turned on. |
| Fault (amber) | If only the amber LED is on, then power supply is off. |
| Power (green) and Fault (amber) | Both the green and amber LEDs on indicates a power supply failure. |
Replacing power supplies (Hot-swap)
To remove a power supply
- Turn the switch on the power supply to the off position.
- Unplug the supply power cord from the electrical outlet.
- Disconnect the power cord from the power supply.
- Grasp each pull-ring and squeeze the latches to release.
- Pull open lever and remove power supply.
| NOTE: When installing a new power supply, make sure that the latch is mounted to the side of the supply that is toward the middle of the machine. If not, remove the lever screw, flip the lever over and replace the screw. See the illustration above. |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU92DKR","label":"System x->Rack\/Storage Enclosures->3520"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MCGN-46BS3Y