Product Documentation
Abstract
Procedures for installing the DIMM memory on the xSeries 206 server.
Content
Text from the audio portion of installing the DIMM memory movie
To install the DIMM:
- Open the retention latches and insert the DIMM straight into the slot, pressing down on both corners at the same time.
-
Install the side support bracket.
- Hold the bracket at a 45-degree angle and engage the locking tab at the front.
- Lower the rear of the bracket and press it into place.
-
Install the side cover:
- Position the cover over the chassis and align the tabs on the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position. Here is a closer look at the cover tab and a slot in the chassis.
- View the DIMM memory removal movie
- View detailed installation and removal instructions for the xSeries 206
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20J","label":"xSeries 206"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-55085