Product Documentation
Abstract
Procedures for removing the bezel from the xSeries 206 server.
Content
Text from the audio portion of removing bezel movie
To remove the bezel:
- Remove the front door: Open the door and pull the door away from the system to release the door pins from the hinge latches.
- Turn off the server and all attached peripheral devices.
- Disconnect all power cords and all external signal cables.
- For easier access to components, place the server on its side. This is the recommended service position.
- Pull the cover release latch away from the server and slide the cover towards the rear of the server.
- Lift the cover off the server and set it aside.
- Press the bezel release lever toward the front of the server.
- Pull the top of the bezel away from the server and slide it towards the bottom of the server to remove it. Here is a closer look at the bezel release lever.
For specific instructions for the removal and installation of hardware
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20J","label":"xSeries 206"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-55068