Product Documentation
Abstract
Procedures for installing the memory DIMM from the xSeries 365 server.
Content
Text from the audio portion of the installing the memory DIMM movie
To Install a DIMM:
- Insert the DIMM into the slot
- Engage the latch on each end of the DIMM,and close the memory cover.
NOTE: Be sure to install DIMMs in the order specified on the service label located on the underside of the top cover.
To install the top cover:
- Position the cover on the chassis while aligning the tabs on the cover with the slots in the chassis.
- Slide the cover toward the front of the system, and secure it with the cover-release latch handle.
Here's a closer look at a cover tab and a slot on the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20E","label":"Older System x->xSeries 365"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-54156