Product Documentation
Abstract
Instructions on installing a SCSI or ServeRAID adapter in the xSeries 200
Content
| Installing a SCSI or ServeRAID adapter (some models) |
|---|
- Connect the SCSI signal cable to the adapter and one or more of the signal cable connectors to the rear of the SCSI devices.
- Connect the SCSI activity indicator cable to the adapter and to the SCSI LED connector (J3) on the system board.
Note: If you are installing a ServeRAID adapter and already have a SCSI adapter installed, remove the SCSI adapter and store it for future use.
- If you have other adapters or options to install or remove, do so now.
- Rotate the front adapter support bracket to the closed (locked) position.
- Reinstall the rear adapter retaining bracket; then, rotate the bracket to the closed (locked) position.
- Reinstall the side cover.
- Reconnect the external cables and power cords; then, turn on the peripheral devices and the server.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18G","label":"Older System x->xSeries 200"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-45037