Product Documentation
Abstract
This document contains information on removing the hot-swap hard drive
Content
| Removing the hot-swap hard disk drive |
|---|
- Power-off the server.
- Disconnect the server from the power supply.
- Remove the front bezel.
- Remove the cover.
- Remove the support bracket.
- Remove any hard disk drives or drive fillers from the drives.
- Disconnect the hard disk drive cables that connect to the system board.
- Remove the screws from the front of the hard disk drive cage.
- Move the cage slightly in and up until it is free of the chassis and lift it out of the server.
Note: Take care not to dislodge the memory when you remove the cage.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18G","label":"Older System x->xSeries 200"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-45009