Product Documentation
Abstract
This document contains System parts listing for IBM eServer xSeries 130 / 135
Content
Notes:
- Replacement part numbers (FRUs) must be serviced only by qualified field service technicians. Customer replaceable units (CRUs) can be replaced by the customer.
- If your specific model is not listed, please use the Quick path feature on the right-nav, and refer to the product description. Look for the "Based on" model.
System - IBM  xSeries 130 / 135 Models 1XX, 1YX | Replacement part number
|
|---|---|
| Heat sink/clip assembly | |
| (All models) | 00N6987 |
| Chassis | |
| (All models) | 00N6990 |
| Bracket/baffle | |
| (All models) | 00N6993 |
| Rail assembly | |
| (All models) | 00N6994 |
| EIA bracket | |
| (All models) | 00N6995 |
| Hardware kit | |
| (All models) | 00N6997 |
| Floppy disk drive/CD-ROM bracket | |
| (All models) | 00N6999 |
| 2 Port serial plate | |
| (All models) | 00N7021 |
| Hard disk drive bezel - blank | |
| (All models) | 00N7259 |
| Right front bezel | |
| (Model 1YX) | 37L6496 |
| Right front bezel | |
| (Model 1XX) | 37L6502 |
| Fan with connector | |
| (All models) | 00N6991 |
| Processor | |
| 800MHz/133MHz | 06P4438 |
| Switch card (includes eServer left front bezel) | |
| (All models) | 09N7225 |
| Terminator card | |
| (All models) | 09N8007 |
| Hard disk drive backplane | |
| (All models) | 19K1038 |
| System board | |
| (All models) | 19K1326 |
| PCI Riser card | |
| (All models) | 19K1350 |
| Slim adapter board | |
| (All models) | 19K1351 |
| Memory | |
| 256MB/133MHz ECC (All models) | 33L3145 |
| Memory, 128MB 133MHz ECC | 33L3143 |
| Memory, 512MB 133MHz ECC | 33L3151 |
| Memory, 1GB 133MHz ECC | 33L3153 |
| Cables | |
| Cable, backplane to planar (All models) | 00N6988 |
| Cable, CD to power (All models) | 00N6989 |
| Cable, serial chassis to planar (All models) | 00N6996 |
| Cable, floppy disk drive signal (All models) | 00N6998 |
| Cable, PCI adapter to backplane (All models) | 00N7000 |
| 245mm analog chaining cable (All models) | 00N7003 |
| 2M breakout cable for keyboard, video, and mouse (KVM) (All models) | 00N7004 |
| 2M analog chaining cable (All models) | 00N7006 |
| Power supply | |
| 200 Watt (All models) | 00N7711 |
| Battery 3.0V | |
| (All models) | 33F8354 |
| Line cord | |
| (All models) | 36L8886 |
| CD-ROM drive | |
| 24X LG (All models) | 06P5263 replaces 09N0883 |
| Diskette drive 3.5 inch 12.7mm | |
| (All models) | 36L8645 |
| Hot swap clip | |
| (All models) | 06P6240 |
| Hardware kit | |
| (All models) contains:Top Cover Assembly (1) PCI Clip Assembly (1) Mounting Bracket (1) I/O Blank Panel (2) M3.5X10 Phillip Screws (5) Shield Cover (1) Slotted M3X5 Screws (6) Shaft Standoff's (6) Slotted M3.5 Screws (15) | 00N6997 |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18E","label":"Older System x->xSeries 135"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-4PYR6P