Product Documentation
Abstract
This document describes the removal of the memory board.
Content
Memory board removal
| NOTE: Read "Safety information" in the Hardware Maintenance Manual (HMM). |
Refer to the following illustrations when performing the following procedure. To reinstall the memory board after it has been removed, reverse the following procedure.
| NOTE: When inserting the memory board into its slot on the processor board, be sure to push down on the edges of the board itself and not on its handle. |
| NOTE: The illustrations show only the processor support tray, processor board, and memory board for simplicity; you do not need to remove the processor support tray from the server to remove the memory board. |
1 Processor support tray cover
2 Quarter-turn fasteners
3 Thumbscrew
4 Memory board
5 Memory board handle
To remove the memory board, do the following:
- Turn off the server and peripheral devices and disconnect all external cables and power cords; then remove the top cover.
- Turn the quarter-turn fasteners 2 on the processor support tray cover 1 one quarter turn and remove the cover from the processor support tray.
- Remove the thumbscrew 3 from the side of the processor support tray.
- Lift up on the memory board handle 5 and remove the memory board 4 from the server.
- Place the memory board 4 on a static-protective surface, such as the static-protective package in which an option came.
See the Hardware Maintenance Manual for the memory board locations.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02PAO","label":"Older System x->Netfinity 5500 M20->8662"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MCGN-45WR9C