IBM Support

SCSI backplane component locations and SCSI backplane option jumpers - Netfinity 5500

Product Documentation


Abstract

SCSI Backplane component locations for the Netfinity 5500

Content

SCSI Backplane component locations

The following simplified layout of the SCSI backplane identifies the components. Refer to this figure when you set the jumpers on the backplane.
backplane
SCSI Backplane option jumpers
The option jumper block on the SCSI backplane defines the SCSI IDs for hot-swap drives. See the illustration in "SCSI Backplane Component Locations" for the location of the option jumper block.

Table 11 summarizes the settings for the SCSI backplane option jumper block (J10). jumper block


Table 12 shows the SCSI IDs that you can use for hot-swap drives.
scsi ids

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN04","label":"Older System x->Netfinity 5500"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
23 January 2019

UID

ibm1MCGN-3UFLUR

Page Feedback