Troubleshooting
Problem
Follow these guidelines when operating the DLT subsystem to avoid basic problems: Use only DLTtape III, IIIXT, or IV cartridges. If there is any suspicion that the tape is damaged (For example if it has been dropped), verify the leader positi
Resolving The Problem
Follow these guidelines when operating the DLT subsystem to avoid basic problems:
- Use only DLTtape III, IIIXT, or IV cartridges.
- If there is any suspicion that the tape is damaged (For example if it has been dropped), verify the leader position (shown in Figure 3-1 below) and check for broken reel lock by shaking the cartridge.
Caution: Do not touch exposed portions of the magnetic tape. If the tape leader is not in the correct position, use a new cartridge.
- Be sure that the receiver is fully closed and the current slot indicator is on for the starting cartridge.
- For backup operation, be sure that no slots in the magazine are empty between the starting cartridge and the expected completion cartridge.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DHN","label":"System x Hardware Options->Tape Drive->35 \/ 70 GB->01K1174"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DHZ","label":"System x Hardware Options->Tape Drive->35 \/ 70 GB->00K7900"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DIF","label":"System x Hardware Options->Tape Drive->35 \/ 70 GB->04K0149"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1VLAR-42XQR5