N series storage systems
contain two hot-swappable power supplies. They are both active at
the same time, but have sufficient capacity that if one fails the
other can assume the full load. Each power supply has a separate power
cord. Separate power sources for each power cord are recommended.
Power cords with attached plugs
are provided for most ac-powered systems. The power cords are ordered
by feature code and at least one power cord must be specified when
the ordering the N series storage system.
A feature code contains two cords, one for each power supply. Power
cables vary by country and are listed in Power cord list for N series storage systems.
Specific voltage information for NAS storage systems and storage
expansion units is provided in the following tables:
- N3150 storage systems:
- N3220 and N3240 storage systems:
- N3300 storage systems:
- N3400 storage systems:
- N3600 storage systems:
- N6000 series storage systems:
- N6200 series storage systems:
- N7000 series storage systems:
- N7x50T series storage systems:
- EXN1000 storage expansion units:
- EXN4000 storage expansion units:
- EXN3000 storage expansion units:
- EXN3200 storage expansion units:
- EXN3500 storage expansion units:
Important: - Before you install the N series storage system,
you must make sure that its proposed location meets the power requirements.
If necessary, consult an electrician to determine if your electrical
infrastructure can support the N series storage system that
you are installing.
- Consider security when planning your power requirements. (For
example, your power mains should be in a secure area.) See Security for more information.