tape_34xx

Messages with a prefix tape_34xx are issued by the channel-attached tape device driver and relate to an IBM® 3480 or IBM 3490 magnetic tape subsystem.

tape_34xx.01b705
<bus ID of the tape device>: The tape unit is not ready
tape_34xx.0a2df0
<bus ID of the tape device>: The tape information states an incorrect length
tape_34xx.0dcb6e
<bus ID of the tape device>: A parity error occurred on the tape bus
tape_34xx.1438e6
<bus ID of the tape device>: A channel interface error cannot be recovered
tape_34xx.150bb7
<bus ID of the tape device>: The tape unit does not support tape format 3480-2 XF
tape_34xx.15d49e
<bus ID of the tape device>: The maximum block size for buffered mode is exceeded
tape_34xx.1e4d72
<bus ID of the tape device>: Opening the tape failed because of missing end-of-file marks
tape_34xx.257c56
<bus ID of the tape device>: A path equipment check occurred for the tape device
tape_34xx.2caadc
<bus ID of the tape device>: I/O error recovery failed on the tape control unit
tape_34xx.33278e
<bus ID of the tape device>: A write error on the tape cannot be recovered
tape_34xx.3be0ed
<bus ID of the tape device>: Reading the tape beyond the end of the recorded area failed
tape_34xx.3f2d36
<bus ID of the tape device>: The tape unit does not support format 3480 XF
tape_34xx.3f38f7
<bus ID of the tape device>: A data overrun occurred between the control unit and tape unit
tape_34xx.442701
<bus ID of the tape device>: The tape unit does not support the tape length
tape_34xx.553e40
<bus ID of the tape device>: Writing the ID-mark failed
tape_34xx.633cc6
<bus ID of the tape device>: The tape unit requires a firmware update
tape_34xx.64dd87
<bus ID of the tape device>: The tape medium has been rewound or unloaded manually
tape_34xx.696dc8
<bus ID of the tape device>: The tape medium is write-protected
tape_34xx.69f60e
<bus ID of the tape device>: The tape unit does not support the current tape length
tape_34xx.6bcece
<bus ID of the tape device>: The tape unit is already assigned
tape_34xx.6e320b
<bus ID of the tape device>: The size of the recorded area is <number of blocks> blocks
tape_34xx.7f9ae4
<bus ID of the tape device>: A channel protocol error occurred
tape_34xx.85efa7
<bus ID of the tape device>: The block ID sequence on the tape is incorrect
tape_34xx.8ce1c3
<bus ID of the tape device>: The tape cartridge has been successfully unloaded
tape_34xx.956e53
<bus ID of the tape device>: The tape does not have the required tape tension
tape_34xx.a6fc3e
<bus ID of the tape device>: Determining the size of the recorded area...
tape_34xx.aaef3e
<bus ID of the tape device>: A tape unit was detached while in use
tape_34xx.b334e9
<bus ID of the tape device>: The tape unit is not online
tape_34xx.bedee0
Tape device <bus ID of the tape device> is busy, refusing to suspend
tape_34xx.c5ee4a
<bus ID of the tape device>: Automatic unloading of the tape cartridge failed
tape_34xx.c7fc10
<bus ID of the tape device>: The tape unit does not support the compaction algorithm
tape_34xx.ccc5ad
<bus ID of the tape device>: The tape unit failed to load the cartridge
tape_34xx.cfc6c4
<bus ID of the tape device>: An equipment check has occurred on the tape unit
tape_34xx.d10f9d
A cartridge is loaded in tape device <bus ID of the tape device>, refusing to suspend
tape_34xx.d2b071
<bus ID of the tape device>: A read error occurred that cannot be recovered
tape_34xx.d56330
<bus ID of the tape device>: The tape contains an incorrect block ID sequence
tape_34xx.d608a6
<bus ID of the tape device>: The control unit has fenced access to the tape volume
tape_34xx.e473c9
<bus ID of the tape device>: The tape subsystem is running in degraded mode
tape_34xx.e96040
<bus ID of the tape device>: The tape unit cannot process the tape format
tape_34xx.f06a05
<bus ID of the tape device>: An unexpected condition <number> occurred in tape error recovery
tape_34xx.fbea0c
<bus ID of the tape device>: A tape cartridge has been mounted

Parent topic: Linux on Z and LinuxONE kernel messages