dasd

Messages with a prefix dasd are issued by the DASD device driver.

dasd.00f842
<bus ID of the DASD>: An I/O control call used incorrect flags 0x<flags>
dasd.01a684
<bus ID of the DASD>: FORMAT 4 - No sync byte in key area
dasd.01f692
<bus ID of the DASD>: FORMAT 9 - Reserved
dasd.02c01a
<bus ID of the DASD>: FORMAT 7 - No response to selection after a poll interruption
dasd.04422e
Registering the device driver with major number <DASD major> failed
dasd.0471ed
<bus ID of the DASD>: FORMAT 0 - Reserved
dasd.04ae78
<bus ID of the DASD>: FORMAT 7 - Missing end operation; device transfer incomplete
dasd.05b6e3
<bus ID of the DASD>: FORMAT 8 - End operation with transfer count zero
dasd.05c8ba
<bus ID of the DASD>: FORMAT 6 - Overrun on channel F
dasd.06e412
<bus ID of the DASD>: FORMAT 0 - Status Not As Required: reason <reason code>
dasd.07541e
<bus ID of the DASD>: FORMAT 0 - CCW Count less than required
dasd.08b7b8
<bus ID of the DASD>: FORMAT 4 - No sync byte in data area
dasd.08d1ee
<bus ID of the DASD>: FORMAT 9 - Head address did not compare
dasd.094439
<bus ID of the DASD>: FORMAT 3 - Reserved
dasd.0ad5d2
<bus ID of the DASD>: FORMAT 4 - No sync byte in home address area
dasd.0ae5e4
Discipline <discipline name> cannot be used without z/VM
dasd.0af728
<bus ID of the DASD>: FORMAT 6 - Overrun on channel B
dasd.0c0534
<bus ID of the DASD> Setting the DASD online failed because the required module <kernel module name> could not be loaded (rc=<return code>)
dasd.0d6cb0
<bus ID of the DASD>: FORMAT F - Subsystem Processing Error
dasd.0e881a
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in for an immediate command sequence
dasd.1211d0
<value> is not a supported value for /proc/dasd/statistics
dasd.126bfe
<bus ID of the DASD>: ERP chain at BEGINNING of ERP-ACTION
dasd.1577ff
<bus ID of the DASD>: FORMAT F - Caching terminated
dasd.157e58
<bus ID of the DASD>: cqr <request> timed out (<timeout value>), <number of retries left> retries remaining
dasd.190a3f
<bus ID of the DASD>: The DASD cannot be formatted with block size <block size>
dasd.1ac0f4
<bus ID of the DASD>: Flushing the DASD request queue failed for request <pointer to request>
dasd.1bdba7
<bus ID of the DASD>: Start track number <track number> used in formatting is too big
dasd.1c04cd
<bus ID of the DASD>: FORMAT 4 - Key area error; offset active
dasd.1c9171
<bus ID of the DASD>: DIAG initialization failed with rc=<return code>
dasd.1cfbb8
<bus ID of the DASD>: FORMAT 1 - Offset active cannot be reset
dasd.1dd1a2
<bus ID of the DASD>: FORMAT 2 - Reserved
dasd.1e2d81
'nopav' is not supported on z/VM
dasd.20b59b
<bus ID of the DASD>: FORMAT 0 - Invalid Command Sequence
dasd.22e514
<bus ID of the DASD>: FORMAT 4 - No syn byte in count address area; offset active
dasd.2529f2
<bus ID of the DASD>: Accessing the DASD failed because it is in probeonly mode
dasd.2567a1
<bus ID of the DASD>: FORMAT 0 - Invalid Command
dasd.2741d8
<bus ID of the DASD>: DIAG ERP failed with rc=<return code>
dasd.292792
<bus ID of the DASD>: FORMAT D - Reserved
dasd.29f189
<bus ID of the DASD>: 0x<command> is not a known command
dasd.2dd933
<bus ID of the DASD>: FORMAT 1 - Device check-2 error or Set Sector is not complete
dasd.2ebc2e
<bus ID of the DASD>: FORMAT 5 - Data Check in the count area; offset active
dasd.2f6a90
The probeonly mode has been activated
dasd.308a03
<bus ID of the DASD>: FORMAT 5 - Reserved
dasd.331a2a
<bus ID of the DASD>: FORMAT 1 - Reserved
dasd.34a404
<bus ID of the DASD>: cqr <pointer to request> timed out (<timeout value>), <number of retries left> retries remaining
dasd.35e4e6
<bus ID of the DASD>: A timeout error occurred for cqr <pointer to request>
dasd.39c600
<bus ID of the DASD>: FORMAT 8 - Unexpected end operation response code
dasd.3dba87
The autodetection mode has been activated
dasd.3dd39b
<bus ID of the DASD>: FORMAT 7 - RCC 1 and RCC 2 sequences not successful
dasd.3e7d29
<bus ID of the DASD> Setting the DASD online with discipline <discipline> failed with rc=<return code>
dasd.3ea257
<bus ID of the DASD>: FORMAT 1 - Device not ready
dasd.400105
<bus ID of the DASD>: FORMAT 6 - Overrun on channel C
dasd.401b68
<bus ID of the DASD>: A channel path to the device has become operational
dasd.412b53
<bus ID of the DASD>: DASD with <block size> KB/block, <DASD size> KB total size, <track size> KB/track, <disc layout>
dasd.423705
<bus ID of the DASD>: FORMAT 0 - Channel Returned with Incorrect retry CCW
dasd.423d5b
<bus ID of the DASD>: FORMAT 7 - Missing end operation; device transfer complete
dasd.42a207
<bus ID of the DASD>: The specified record was not found
dasd.43830c
<bus ID of the DASD>: FORMAT F - Caching reinitiated
dasd.459c47
<bus ID of the DASD>: log SIM - SRC: <sense byte><sense byte><sense byte><sense byte>
dasd.45f2d1
<bus ID of the DASD>: The disk layout of the DASD is not supported
dasd.46d841
<bus ID of the DASD>: FORMAT 5 - Data Check in the key area
dasd.47fcac
<bus ID of the DASD>: ERP <pointer to ERP> (<ERP status>) refers to <cqr>
dasd.481dec
<bus ID of the DASD>: FORMAT F - Cache fast write access not authorized
dasd.487b65
<bus ID of the DASD>: SIM - SRC: <sense byte><sense byte><sense byte><sense byte>
dasd.4a5b55
<bus ID of the DASD>: FORMAT 7 - DASD controller not available on disconnected command chain
dasd.4aeb6d
<bus ID of the DASD>: FORMAT 8 - DASD controller failed to set or reset the long busy latch
dasd.4cdcde
<bus ID of the DASD>: ERP chain at END of ERP-ACTION
dasd.4e48d3
<bus ID of the DASD>: ioctl timeout flag unset
dasd.5005eb
<bus ID of the DASD>: FORMAT 8 - Reserved
dasd.50a6e5
<bus ID of the DASD>: Formatting unit <start track> failed with rc=<return code>
dasd.518c6a
The dasd= parameter value <parameter value> has an invalid ending
dasd.52d5fe
<bus ID of the DASD>: cqr <pointer to request> transport error
dasd.5303a1
PAV support has be deactivated
dasd.538dcc
<bus ID of the DASD>: FORMAT 4 - Reserved
dasd.55aa2f
<bus ID of the DASD>: FORMAT 1 - Missing device address bit
dasd.56adec
<bus ID of the DASD>: A transport error occurred for cqr <pointer to request>
dasd.5806f8
<bus ID of the DASD>: FORMAT 8 - DPS checks after a system reset or selective reset
dasd.58865b
<bus ID of the DASD>: FORMAT 1 - Cylinder address did not compare
dasd.58c328
<bus ID of the DASD>: FORMAT 0 - Invalid Defective/Alternate Track Pointer
dasd.5c0c98
<bus ID of the DASD>: default ERP has run out of retries and failed
dasd.5cf324
<bus ID of the DASD>: FORMAT F - Volume is suspended duplex
dasd.5efa1b
<bus ID of the DASD>: FORMAT 4 - No sync byte in count address area
dasd.648dca
<bus ID of the DASD>: FORMAT 6 - Overrun on channel D
dasd.65917e
<bus ID of the DASD>: Data recovered during retry with PCI fetch mode active
dasd.65b8de
<bus ID of the DASD>: FORMAT 7 - Reserved
dasd.680aac
<bus ID of the DASD>: Allocating memory for private DASD data failed
dasd.68f0f6
<bus ID of the DASD>: A transport error occurred for cqr <pointer to request>
dasd.696eb5
<option> is not a supported device option
dasd.6e3fdc
<bus ID of the DASD>: FORMAT 6 - Overrun on channel G
dasd.6eae2d
<bus ID of the DASD>: is offline or not installed - INTERVENTION REQUIRED!!
dasd.7109ed
<bus ID of the DASD>: FORMAT 1 - Interruption cannot be reset
dasd.72eaa3
<bus ID of the DASD>: FORMAT 6 - Overrun on channel A
dasd.74be4d
<bus ID of the DASD>: FORMAT 8 - DPS cannot be filled
dasd.75373e
<bus ID of the DASD>: Cancelling request <pointer to request> failed with rc=<return code of previous function>
dasd.757950
<bus ID of the DASD>: New FBA DASD <device type>/<device model> (CU <control unit type>/<control unit model>) with <size> MB and <bytes per block> B/blk
dasd.75ca81
<bus ID of the DASD>: FORMAT 0 - Device Error Source
dasd.760a94
<bus ID of the DASD>: The specified DASD is a partition and cannot be checked
dasd.781738
High Performance FICON support has been deactivated
dasd.7854c0
<bus ID of the DASD>: The DASD cannot be set offline while it is in use
dasd.78e1df
A closing parenthesis ')' is missing in the dasd= parameter
dasd.792e2f
<bus ID of the DASD>: FORMAT 8 - End operation with transfer count not zero
dasd.7b19bf
<bus ID of the DASD>: FORMAT 3 - Allegiance terminated
dasd.7bb394
<bus ID of the DASD>: FORMAT 7 - Invalid DCC selection response or timeout
dasd.7c1681
<bus ID of the DASD>: FORMAT 0 - Storage Path Restart
dasd.7eabfd
<bus ID of the DASD>: FORMAT 0 - Diagnostic of Special Command Violates File Mask
dasd.7f0765
<bus ID of the DASD>: Track 0 has no records following the VTOC
dasd.81757d
<bus ID of the DASD>: FORMAT 1 - Device Status 1 not as expected
dasd.840169
<bus ID of the DASD>: FORMAT 6 - Overrun on channel E
dasd.869e5e
<bus ID of the DASD>: FORMAT 6 - Overrun on channel H
dasd.894a4b
<bus ID of the DASD>: FORMAT 7 - 3990 microcode time out when stopping selection
dasd.8b4bdf
<bus ID of the DASD>: FORMAT 2 - Microcode detected error <error code>
dasd.8ca077
<bus ID of the DASD>: cqr <pointer to request> timeout error
dasd.90fb0d
<bus ID of the DASD>: New DASD <device type>/<device model> (CU <control unit type>/<control unit model>) with <number of cylinders> cylinders, <tracks per cylinder> heads, <sectors per track> sectors
dasd.910d5f
<bus ID of the DASD>: FORMAT 0 - Data Pinned for Device
dasd.939f75
The statistics have been reset
dasd.948ccf
<bus ID of the DASD>: FORMAT 4 - Key area error
dasd.966201
The statistics feature has been switched on
dasd.96f088
<bus ID of the DASD>: FORMAT 7 - RCC 1 sequence not successful
dasd.9957b7
<bus ID of the DASD>: FORMAT 1 - Head address does not compare
dasd.9a48d5
<bus ID of the DASD>: FORMAT 4 - No syn byte in data area; offset active
dasd.9bb776
<bus ID of the DASD>: FORMAT 4 - Data area error; offset active
dasd.9d6a8a
<bus ID of the DASD>: No verified channel paths remain for the device
dasd.9e183a
<bus ID of the DASD>: FORMAT 4 - Count area error
dasd.9f31f9
<bus ID of the DASD>: FORMAT 7 - RCC initiated by a connection check alert
dasd.a0ce75
<bus ID of the DASD>: FORMAT 4 - No sync byte in key area; offset active
dasd.a28dc6
<bus ID of the DASD>: The DASD cache mode was set to <operation mode> (<number of cylinders> cylinder prestage)
dasd.a2cf19
<bus ID of the DASD>: Unable to terminate request <pointer to request> on suspend
dasd.a35e01
<bus ID of the DASD> Setting the DASD online failed because of a missing discipline
dasd.a3baba
<bus ID of the DASD>: I/O operations have been resumed on the DASD
dasd.a3bece
<bus ID of the DASD>: The DASD cannot be formatted while it is enabled
dasd.a3c651
<bus ID of the DASD>: FORMAT 9 - Device check-2 error
dasd.a4325c
<bus ID of the DASD>: FORMAT 0 - Reset Notification
dasd.a6cafa
The statistics feature has been switched off
dasd.a77e4f
<bus ID of the DASD>: FORMAT 1 - Track physical address did not compare
dasd.a7b0fb
<bus ID of the DASD>: The DASD has been put in the quiesce state
dasd.a9cbd8
<bus ID of the DASD>: FORMAT 1 - Drive motor switch is off
dasd.aac43a
<bus ID of the DASD>: FORMAT 0 - Device Fenced - device = <sense data byte 4>
dasd.ac3f69
<bus ID of the DASD>: ERP failed
dasd.ac6397
<bus ID of the DASD>: FORMAT 1 - Index missing
dasd.acd228
<bus ID of the DASD>: FORMAT 7 - extra RCC required
dasd.adb621
<bus ID of the DASD>: ERP failed for the DASD
dasd.b13a1f
<bus ID of the DASD>: A timeout error occurred for cqr <pointer to request>
dasd.b14557
<bus ID of the DASD>: FORMAT 4 - Data area error
dasd.b281ed
<bus ID of the DASD>: The DASD is not formatted
dasd.b3193d
<bus ID of the DASD>: An error occurred in the DASD device driver, reason=<reason code>
dasd.b81b6c
<bus ID of the DASD>: The DASD cannot be reached on any path (lpum=<last path used mask>/opm=<online path mask>)
dasd.b98207
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in for an extended command sequence
dasd.b998d3
<bus ID of the DASD>: New DASD with <bytes per block> byte/block, total size <size> KB
dasd.bba496
<bus ID of the DASD>: FORMAT 9 - Track physical address did not compare while oriented
dasd.bba7e6
<bus ID of the DASD>: The specified DASD is a partition and cannot be formatted
dasd.bbe891
<bus ID of the DASD>: FORMAT F - Subsystem status cannot be determined
dasd.bd1a0f
<bus ID of the DASD>: Start track <track number> used in formatting exceeds end track
dasd.be85b8
<bus ID of the DASD>: FORMAT F - Cache or nonvolatile storage equipment failure
dasd.bfc2cb
<bus ID of the DASD>: FORMAT F - Nonvolatile storage terminated
dasd.c0aa71
<bus ID of the DASD> Setting the DASD online failed because of missing DIAG discipline
dasd.c1bf11
<bus ID of the DASD>: The DASD cannot be set offline with open count <count>
dasd.c28ccc
<bus ID of the DASD>: FORMAT 0 - DPS Installation Check
dasd.c3ebff
<bus ID of the DASD>: FORMAT 5 - Data Check in the data area
dasd.c533c6
<bus ID of the DASD>: No operational channel path is left for the device
dasd.c55c2f
<bus ID of the DASD>: Unable to allocate DCTL-CQR
dasd.c67479
<bus ID of the DASD>: FORMAT 1 - Seek incomplete
dasd.c81491
<bus ID of the DASD>: Device type <device type> is not supported in DIAG mode
dasd.c87cc2
<bus ID of the DASD>: FORMAT 5 - Data Check in the key area; offset active
dasd.c9cc06
<bus ID of the DASD>: FORMAT 1 - Device status 1 not valid
dasd.c9f7f5
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in during selection sequence
dasd.ca8dfc
<bus ID of the DASD>: FORMAT 7 - Permanent path error (DASD controller not available)
dasd.cf8d3d
<bus ID of the DASD>: FORMAT 5 - Data Check in the count area
dasd.d0c64e
<bus ID of the DASD>: A 64-bit DIAG call failed
dasd.d2af02
<bus ID of the DASD>: FORMAT 0 - Channel requested ... <reason code>
dasd.d2bf98
<bus ID of the DASD>: ERP <ERP pointer> has run out of retries and failed
dasd.d303ec
<bus ID of the DASD>: The access mode of a DIAG device changed to read-only
dasd.d35646
<bus ID of the DASD>: FORMAT 8 - No interruption from device during a command chain
dasd.d4a740
<bus ID of the DASD>: Write inhibited path encountered
dasd.d4d6d2
<bus ID of the DASD>: FORMAT F - DASD Fast Write inhibited
dasd.d66c5d
<bus ID of the DASD>: FORMAT 4 - No sync byte in home address area; offset active
dasd.d74b52
<bus ID of the DASD>: FORMAT F - Track format incorrect
dasd.d7a598
<bus ID of the DASD>: FORMAT 5 - Data Check in the home address area
dasd.d82ca0
<bus ID of the DASD>: FORMAT 2 - Support facility errors
dasd.d84a7b
<bus ID of the DASD>: start_IO run out of retries and failed with request <pointer to request>
dasd.da6176
<bus ID of the DASD>: cqr <request> timed out (<timeout value>) but cannot be ended, retrying in 5 s
dasd.dcc26f
<bus ID of the DASD>: FORMAT 0 - Invalid Parameter
dasd.de3a76
The DASD device driver could not be initialized
dasd.df34c6
The IPL device is not a CCW device
dasd.e0558d
<bus ID of the DASD>: FORMAT 9 - Cylinder address did not compare
dasd.e0679b
<bus ID of the DASD>: FORMAT 8 - Short busy time-out during device selection
dasd.e181a1
<bus ID of the DASD>: FORMAT 4 - Home address area error
dasd.e1da4d
<bus ID of the DASD>: cqr <pointer to request> timed out (<timeout value>) but cannot be ended, retrying in 5 s
dasd.e698e6
<bus ID of the DASD>: FORMAT 8 - Error correction code hardware fault
dasd.e8d084
<bus ID of the DASD>: Accessing the DASD failed because of an incorrect format (rc=<return code>)
dasd.e951ba
<bus ID of the DASD>: FORMAT 4 - Count area error; offset active
dasd.eac657
<bus ID of the DASD>: New DASD with <bytes per block> byte/block, total size <size> KB<access mode>
dasd.ed1a53
<bus ID of the DASD>: FORMAT 5 - Data Check in the home address area; offset active
dasd.f02333
<bus ID of the DASD>: The cylinder data for accessing the DASD is inconsistent
dasd.f0ba2c
<bus ID of the DASD>: FORMAT 4 - Home address area error; offset active
dasd.f453eb
<bus ID of the DASD>: FORMAT 1 - Device did not respond to selection
dasd.f4a01e
<bus ID of the DASD>: FORMAT 0 - Command Invalid on Secondary Address
dasd.f58554
<bus ID of the DASD>: FORMAT 5 - Data Check in the data area; offset active
dasd.f59fd6
<bus ID of the DASD>: FORMAT 6 - Reserved
dasd.f6f541
<bus ID of the DASD>: FORMAT F - Caching status reset to default
dasd.f97899
<bus ID of the DASD>: Setting the DASD online failed with rc=<return code>
dasd.f99a70
<bus ID of the DASD>: FORMAT F - Operation Terminated
dasd.fba34e
<bus ID of the DASD>: Accessing the DASD failed because of a hardware error
dasd.fc2c31
<bus ID of the DASD>: ioctl timeout flag set
dasd.ff4c45
<range> is not a valid device range
dasd.ffd164
<bus ID of the DASD>: FORMAT 2 - 3990 check-2 error

Parent topic: Linux on Z and LinuxONE kernel messages