dasd-eckd

Messages with a prefix dasd-eckd are issued by the DASD device driver module that handles DASDs with the Extended Count Key Data (ECKD) format.

dasd-eckd.00f842
<bus ID of the DASD>: An I/O control call used incorrect flags 0x<flags>
dasd-eckd.01a684
<bus ID of the DASD>: FORMAT 4 - No sync byte in key area
dasd-eckd.01f692
<bus ID of the DASD>: FORMAT 9 - Reserved
dasd-eckd.02c01a
<bus ID of the DASD>: FORMAT 7 - No response to selection after a poll interruption
dasd-eckd.0471ed
<bus ID of the DASD>: FORMAT 0 - Reserved
dasd-eckd.04ae78
<bus ID of the DASD>: FORMAT 7 - Missing end operation; device transfer incomplete
dasd-eckd.05b6e3
<bus ID of the DASD>: FORMAT 8 - End operation with transfer count zero
dasd-eckd.05c8ba
<bus ID of the DASD>: FORMAT 6 - Overrun on channel F
dasd-eckd.06e412
<bus ID of the DASD>: FORMAT 0 - Status Not As Required: reason <reason code>
dasd-eckd.07541e
<bus ID of the DASD>: FORMAT 0 - CCW Count less than required
dasd-eckd.08b486
<bus ID of the DASD>: Last path <cssid>.<chpid> (pathmask <logical path mask>) is operational despite excessive IFCCs
dasd-eckd.08b7b8
<bus ID of the DASD>: FORMAT 4 - No sync byte in data area
dasd-eckd.08d1ee
<bus ID of the DASD>: FORMAT 9 - Head address did not compare
dasd-eckd.094439
<bus ID of the DASD>: FORMAT 3 - Reserved
dasd-eckd.0ad5d2
<bus ID of the DASD>: FORMAT 4 - No sync byte in home address area
dasd-eckd.0af298
<bus ID of the DASD>: FORMAT 4 - No sync byte in count address area; offset active
dasd-eckd.0af728
<bus ID of the DASD>: FORMAT 6 - Overrun on channel B
dasd-eckd.0d6cb0
<bus ID of the DASD>: FORMAT F - Subsystem Processing Error
dasd-eckd.0e881a
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in for an immediate command sequence
dasd-eckd.0ec8bb
<bus ID of the DASD>: Reading device feature codes failed (rc=<return code>) for new path <path mask>
dasd-eckd.120e7f
<bus ID of the DASD>: Channel path <logical path mask> lost HPF functionality and is disabled
dasd-eckd.126bfe
<bus ID of the DASD>: ERP chain at BEGINNING of ERP-ACTION
dasd-eckd.1577ff
<bus ID of the DASD>: FORMAT F - Caching terminated
dasd-eckd.190a3f
<bus ID of the DASD>: The DASD cannot be formatted with block size <block size>
dasd-eckd.1bdba7
<bus ID of the DASD>: Start track number <track number> used in formatting is too big
dasd-eckd.1c04cd
<bus ID of the DASD>: FORMAT 4 - Key area error; offset active
dasd-eckd.1cfbb8
<bus ID of the DASD>: FORMAT 1 - Offset active cannot be reset
dasd-eckd.1dd1a2
<bus ID of the DASD>: FORMAT 2 - Reserved
dasd-eckd.1fd065
<bus ID of the DASD>: Detecting the maximum supported data size for zHPF requests failed
dasd-eckd.20b59b
<bus ID of the DASD>: FORMAT 0 - Invalid Command Sequence
dasd-eckd.22e514
<bus ID of the DASD>: FORMAT 4 - No syn byte in count address area; offset active
dasd-eckd.252dae
<bus ID of the DASD>: An error occurred in the DASD device driver, reason=09
dasd-eckd.2567a1
<bus ID of the DASD>: FORMAT 0 - Invalid Command
dasd-eckd.27f2cd
<bus ID of the DASD>: The DASD is not operating in multipath mode
dasd-eckd.292792
<bus ID of the DASD>: FORMAT D - Reserved
dasd-eckd.29f189
<bus ID of the DASD>: 0x<command> is not a known command
dasd-eckd.2aa01a
<bus ID of the DASD>: New DASD <device type>/<device model> (CU <control unit type>/<control unit model>) with <number of cylinders> cylinders, <tracks per cylinder> heads, <sectors per track> sectors<access mode>
dasd-eckd.2dd933
<bus ID of the DASD>: FORMAT 1 - Device check-2 error or Set Sector is not complete
dasd-eckd.2ebc2e
<bus ID of the DASD>: FORMAT 5 - Data Check in the count area; offset active
dasd-eckd.308a03
<bus ID of the DASD>: FORMAT 5 - Reserved
dasd-eckd.331a2a
<bus ID of the DASD>: FORMAT 1 - Reserved
dasd-eckd.36ac9b
<bus ID of the DASD>: Start track <track number> used in formatting exceeds end track
dasd-eckd.39c600
<bus ID of the DASD>: FORMAT 8 - Unexpected end operation response code
dasd-eckd.3dd39b
<bus ID of the DASD>: FORMAT 7 - RCC 1 and RCC 2 sequences not successful
dasd-eckd.3ea257
<bus ID of the DASD>: FORMAT 1 - Device not ready
dasd-eckd.400105
<bus ID of the DASD>: FORMAT 6 - Overrun on channel C
dasd-eckd.412b53
<bus ID of the DASD>: DASD with <block size> KB/block, <DASD size> KB total size, <track size> KB/track, <disc layout>
dasd-eckd.4170f2
<bus ID of the DASD>: The UID of the DASD has changed
dasd-eckd.423705
<bus ID of the DASD>: FORMAT 0 - Channel Returned with Incorrect retry CCW
dasd-eckd.423d5b
<bus ID of the DASD>: FORMAT 7 - Missing end operation; device transfer complete
dasd-eckd.42a207
<bus ID of the DASD>: The specified record was not found
dasd-eckd.43830c
<bus ID of the DASD>: FORMAT F - Caching reinitiated
dasd-eckd.459c47
<bus ID of the DASD>: log SIM - SRC: <sense byte><sense byte><sense byte><sense byte>
dasd-eckd.45f2d1
<bus ID of the DASD>: The disk layout of the DASD is not supported
dasd-eckd.46d841
<bus ID of the DASD>: FORMAT 5 - Data Check in the key area
dasd-eckd.47fcac
<bus ID of the DASD>: ERP <pointer to ERP> (<ERP status>) refers to <cqr>
dasd-eckd.481dec
<bus ID of the DASD>: FORMAT F - Cache fast write access not authorized
dasd-eckd.487b65
<bus ID of the DASD>: SIM - SRC: <sense byte><sense byte><sense byte><sense byte>
dasd-eckd.4a5b55
<bus ID of the DASD>: FORMAT 7 - DASD controller not available on disconnected command chain
dasd-eckd.4aeb6d
<bus ID of the DASD>: FORMAT 8 - DASD controller failed to set or reset the long busy latch
dasd-eckd.4cdcde
<bus ID of the DASD>: ERP chain at END of ERP-ACTION
dasd-eckd.4dfdcd
<bus ID of the DASD>: High Performance FICON disabled
dasd-eckd.5005eb
<bus ID of the DASD>: FORMAT 8 - Reserved
dasd-eckd.538dcc
<bus ID of the DASD>: FORMAT 4 - Reserved
dasd-eckd.55aa2f
<bus ID of the DASD>: FORMAT 1 - Missing device address bit
dasd-eckd.5806f8
<bus ID of the DASD>: FORMAT 8 - DPS checks after a system reset or selective reset
dasd-eckd.58865b
<bus ID of the DASD>: FORMAT 1 - Cylinder address did not compare
dasd-eckd.58c328
<bus ID of the DASD>: FORMAT 0 - Invalid Defective/Alternate Track Pointer
dasd-eckd.5cf324
<bus ID of the DASD>: FORMAT F - Volume is suspended duplex
dasd-eckd.5efa1b
<bus ID of the DASD>: FORMAT 4 - No sync byte in count address area
dasd-eckd.5f55a6
Path <channel subsystem ID>.<CHPID> is back online after service on the storage server
dasd-eckd.637cf1
<bus ID of the DASD>: Reading device feature codes failed with rc=<return code>
dasd-eckd.648dca
<bus ID of the DASD>: FORMAT 6 - Overrun on channel D
dasd-eckd.65917e
<bus ID of the DASD>: Data recovered during retry with PCI fetch mode active
dasd-eckd.65b8de
<bus ID of the DASD>: FORMAT 7 - Reserved
dasd-eckd.680aac
<bus ID of the DASD>: Allocating memory for private DASD data failed
dasd-eckd.6e3fdc
<bus ID of the DASD>: FORMAT 6 - Overrun on channel G
dasd-eckd.6eae2d
<bus ID of the DASD>: is offline or not installed - INTERVENTION REQUIRED!!
dasd-eckd.7109ed
<bus ID of the DASD>: FORMAT 1 - Interruption cannot be reset
dasd-eckd.72eaa3
<bus ID of the DASD>: FORMAT 6 - Overrun on channel A
dasd-eckd.74be4d
<bus ID of the DASD>: FORMAT 8 - DPS cannot be filled
dasd-eckd.75ca81
<bus ID of the DASD>: FORMAT 0 - Device Error Source
dasd-eckd.767039
Service on the storage server caused path <channel subsystem ID>.<CHPID> to go offline
dasd-eckd.792e2f
<bus ID of the DASD>: FORMAT 8 - End operation with transfer count not zero
dasd-eckd.7b19bf
<bus ID of the DASD>: FORMAT 3 - Allegiance terminated
dasd-eckd.7bb394
<bus ID of the DASD>: FORMAT 7 - Invalid DCC selection response or timeout
dasd-eckd.7c1681
<bus ID of the DASD>: FORMAT 0 - Storage Path Restart
dasd-eckd.7eabfd
<bus ID of the DASD>: FORMAT 0 - Diagnostic of Special Command Violates File Mask
dasd-eckd.7f0765
<bus ID of the DASD>: Track 0 has no records following the VTOC
dasd-eckd.81757d
<bus ID of the DASD>: FORMAT 1 - Device Status 1 not as expected
dasd-eckd.840169
<bus ID of the DASD>: FORMAT 6 - Overrun on channel E
dasd-eckd.869e5e
<bus ID of the DASD>: FORMAT 6 - Overrun on channel H
dasd-eckd.87ddea
<bus ID of the DASD>: A channel path group could not be established
dasd-eckd.894a4b
<bus ID of the DASD>: FORMAT 7 - 3990 microcode time out when stopping selection
dasd-eckd.8b4bdf
<bus ID of the DASD>: FORMAT 2 - Microcode detected error <error code>
dasd-eckd.90fb0d
<bus ID of the DASD>: New DASD <device type>/<device model> (CU <control unit type>/<control unit model>) with <number of cylinders> cylinders, <tracks per cylinder> heads, <sectors per track> sectors
dasd-eckd.910d5f
<bus ID of the DASD>: FORMAT 0 - Data Pinned for Device
dasd-eckd.91bb3c
<bus ID of the DASD>: FORMAT F - Reserved
dasd-eckd.948ccf
<bus ID of the DASD>: FORMAT 4 - Key area error
dasd-eckd.96f088
<bus ID of the DASD>: FORMAT 7 - RCC 1 sequence not successful
dasd-eckd.9957b7
<bus ID of the DASD>: FORMAT 1 - Head address does not compare
dasd-eckd.9a48d5
<bus ID of the DASD>: FORMAT 4 - No syn byte in data area; offset active
dasd-eckd.9bb776
<bus ID of the DASD>: FORMAT 4 - Data area error; offset active
dasd-eckd.9e183a
<bus ID of the DASD>: FORMAT 4 - Count area error
dasd-eckd.9f31f9
<bus ID of the DASD>: FORMAT 7 - RCC initiated by a connection check alert
dasd-eckd.a0ce75
<bus ID of the DASD>: FORMAT 4 - No sync byte in key area; offset active
dasd-eckd.a28dc6
<bus ID of the DASD>: The DASD cache mode was set to <operation mode> (<number of cylinders> cylinder prestage)
dasd-eckd.a3c651
<bus ID of the DASD>: FORMAT 9 - Device check-2 error
dasd-eckd.a4325c
<bus ID of the DASD>: FORMAT 0 - Reset Notification
dasd-eckd.a56dba
<bus ID of the DASD>: The DASD cannot be formatted with block size <block size>
dasd-eckd.a77e4f
<bus ID of the DASD>: FORMAT 1 - Track physical address did not compare
dasd-eckd.a7b39e
<bus ID of the DASD>: Path <cssid>.<chpid> (pathmask <logical path mask>) is disabled - IFCC threshold exceeded
dasd-eckd.a9cbd8
<bus ID of the DASD>: FORMAT 1 - Drive motor switch is off
dasd-eckd.aac43a
<bus ID of the DASD>: FORMAT 0 - Device Fenced - device = <sense data byte 4>
dasd-eckd.ac3f69
<bus ID of the DASD>: ERP failed
dasd-eckd.ac6397
<bus ID of the DASD>: FORMAT 1 - Index missing
dasd-eckd.acd228
<bus ID of the DASD>: FORMAT 7 - extra RCC required
dasd-eckd.adb621
<bus ID of the DASD>: ERP failed for the DASD
dasd-eckd.b14557
<bus ID of the DASD>: FORMAT 4 - Data area error
dasd-eckd.b22b7e
<bus ID of the DASD>: An I/O request was rejected because writing is inhibited
dasd-eckd.b281ed
<bus ID of the DASD>: The DASD is not formatted
dasd-eckd.b3193d
<bus ID of the DASD>: An error occurred in the DASD device driver, reason=<reason code>
dasd-eckd.b3f650
<bus ID of the DASD>: The newly added channel path <logical path mask> will not be used because it leads to a different device <UID>
dasd-eckd.b81b6c
<bus ID of the DASD>: The DASD cannot be reached on any path (lpum=<last path used mask>/opm=<online path mask>)
dasd-eckd.b98207
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in for an extended command sequence
dasd-eckd.bba496
<bus ID of the DASD>: FORMAT 9 - Track physical address did not compare while oriented
dasd-eckd.bbe891
<bus ID of the DASD>: FORMAT F - Subsystem status cannot be determined
dasd-eckd.bd1a0f
<bus ID of the DASD>: Start track <track number> used in formatting exceeds end track
dasd-eckd.be85b8
<bus ID of the DASD>: FORMAT F - Cache or nonvolatile storage equipment failure
dasd-eckd.bfc2cb
<bus ID of the DASD>: FORMAT F - Nonvolatile storage terminated
dasd-eckd.c28ccc
<bus ID of the DASD>: FORMAT 0 - DPS Installation Check
dasd-eckd.c3ebff
<bus ID of the DASD>: FORMAT 5 - Data Check in the data area
dasd-eckd.c55c2f
<bus ID of the DASD>: Unable to allocate DCTL-CQR
dasd-eckd.c67479
<bus ID of the DASD>: FORMAT 1 - Seek incomplete
dasd-eckd.c87cc2
<bus ID of the DASD>: FORMAT 5 - Data Check in the key area; offset active
dasd-eckd.c9cc06
<bus ID of the DASD>: FORMAT 1 - Device status 1 not valid
dasd-eckd.c9f7f5
<bus ID of the DASD>: FORMAT 7 - Invalid tag-in during selection sequence
dasd-eckd.ca8dfc
<bus ID of the DASD>: FORMAT 7 - Permanent path error (DASD controller not available)
dasd-eckd.cf8d3d
<bus ID of the DASD>: FORMAT 5 - Data Check in the count area
dasd-eckd.d1a88a
<bus ID of the DASD>: Detecting the DASD disk layout failed because of an I/O error
dasd-eckd.d2af02
<bus ID of the DASD>: FORMAT 0 - Channel requested ... <reason code>
dasd-eckd.d2bf98
<bus ID of the DASD>: ERP <ERP pointer> has run out of retries and failed
dasd-eckd.d35646
<bus ID of the DASD>: FORMAT 8 - No interruption from device during a command chain
dasd-eckd.d4a740
<bus ID of the DASD>: Write inhibited path encountered
dasd-eckd.d4d6d2
<bus ID of the DASD>: FORMAT F - DASD Fast Write inhibited
dasd-eckd.d608df
<bus ID of the DASD>: Start track number <track number> used in formatting is too big
dasd-eckd.d66c5d
<bus ID of the DASD>: FORMAT 4 - No sync byte in home address area; offset active
dasd-eckd.d74b52
<bus ID of the DASD>: FORMAT F - Track format incorrect
dasd-eckd.d7a598
<bus ID of the DASD>: FORMAT 5 - Data Check in the home address area
dasd-eckd.d82ca0
<bus ID of the DASD>: FORMAT 2 - Support facility errors
dasd-eckd.dc4849
<bus ID of the DASD>: The maximum data size for zHPF requests <size in bytes> on a new path <path mask> is below the active maximum <size in bytes>
dasd-eckd.dcc26f
<bus ID of the DASD>: FORMAT 0 - Invalid Parameter
dasd-eckd.def9e6
<bus ID of the DASD>: Path <cssid>.<chpid> (pathmask <logical path mask>) is operational despite excessive IFCCs
dasd-eckd.e0558d
<bus ID of the DASD>: FORMAT 9 - Cylinder address did not compare
dasd-eckd.e0679b
<bus ID of the DASD>: FORMAT 8 - Short busy time-out during device selection
dasd-eckd.e181a1
<bus ID of the DASD>: FORMAT 4 - Home address area error
dasd-eckd.e698e6
<bus ID of the DASD>: FORMAT 8 - Error correction code hardware fault
dasd-eckd.e951ba
<bus ID of the DASD>: FORMAT 4 - Count area error; offset active
dasd-eckd.ec6f52
<bus ID of the DASD>: Stop track number <track number> used in formatting is too big
dasd-eckd.ed1a53
<bus ID of the DASD>: FORMAT 5 - Data Check in the home address area; offset active
dasd-eckd.f02333
<bus ID of the DASD>: The cylinder data for accessing the DASD is inconsistent
dasd-eckd.f0ba2c
<bus ID of the DASD>: FORMAT 4 - Home address area error; offset active
dasd-eckd.f4346b
<bus ID of the DASD>: The device reservation was lost
dasd-eckd.f453eb
<bus ID of the DASD>: FORMAT 1 - Device did not respond to selection
dasd-eckd.f4a01e
<bus ID of the DASD>: FORMAT 0 - Command Invalid on Secondary Address
dasd-eckd.f4ccb9
<bus ID of the alias>: An Alias device was reassigned to a new base device with UID: <UID of new base device>
dasd-eckd.f546ed
<bus ID of the DASD>: Detecting the maximum data size for zHPF requests failed (rc=<return code>) for a new path <path mask>
dasd-eckd.f58554
<bus ID of the DASD>: FORMAT 5 - Data Check in the data area; offset active
dasd-eckd.f59fd6
<bus ID of the DASD>: FORMAT 6 - Reserved
dasd-eckd.f6f541
<bus ID of the DASD>: FORMAT F - Caching status reset to default
dasd-eckd.f716c1
<bus ID of the DASD>: The storage server does not support raw-track access
dasd-eckd.f85adb
<bus ID of the DASD>: FORMAT 4 - No sync byte in data area; offset active
dasd-eckd.f99a70
<bus ID of the DASD>: FORMAT F - Operation Terminated
dasd-eckd.fba34e
<bus ID of the DASD>: Accessing the DASD failed because of a hardware error
dasd-eckd.fe3f84
<bus ID of the DASD>: Not all channel paths lead to the same device, path <logical path mask> leads to device <UID> instead of <UID>
dasd-eckd.ffd164
<bus ID of the DASD>: FORMAT 2 - 3990 check-2 error

Parent topic: Linux on Z and LinuxONE kernel messages